Search results for query: *

Hi, I am assembling my 70 air grabber for my Road Runner. My 70 FSM does not have any diagrams of the 70 AG (it has the 69!!). I searched the forum and also came up empty. Specifically, I am looking for the gaskets and pieces that attach to (or come in contact with) the hood scoop. An...

I have a 1970 Road Runner I am restoring. My car had an angle iron "replacement" battery tray that could have worked well in a tank. While I appreciate the solid construction, I am returning the car to stock. I mounted the batter tray itself, but I am having trouble getting the battery tray...

Before I discarded my original 1970 California gas tank I cut it open to reveal the inside. I was surprised at the inside of the tank. (By the way, the tank had been purged, sitting open for 6 months, etc. so I was NOT trying to live dangerously...) The four vent tubes from the tank go to...

So I bought a set of turn signals for the hood of my 1970 Road Runner. They are rough but I am going to see if I can revive them. I have some questions: 1) How do you remove the wires from the back of the housing (see pen pointing in picture)? Do they screw off, pull off, or what? Mine...

So I found out my 1970 Service Manual is not helpful for my air grabber. It shows a 1969 setup! So much for that! All my connections on my air grabber have been either disconnected and/or rerouted. I temporarily hooked the manifold vacuum direct to the air grabber so it opens when the car...

I have a 1970 Plymouth Road Runner with an air grabber. Problem is, the hole where the hoses route through the firewall is not drilled. This hole is in the passenger side firewall above the heater hoses. Can someone please let me know the proper size of the hole? Any help would be much...

Someone tore ALL the windshield washer components out of my 70 Road Runner. I am now trying to put them back. I have replaced the washer tank, motor and power (and it now works!), and I have seen in some other pictures how the hose runs up the passenger side, and then runs across the cowl area...

OK list, maybe a dumb question... For my 70 Road Runner: I bought a replacement engine forward wiring harness. It has leads on it for two horns. I know most cars have one high note and one low note horn. I thought the Road Runner only had one (Beep-Beep) horn. Is this correct? If so, does...

I purchased a 1970 Roadrunner that is largely unrestored, with 80,000 miles and is mostly unmolested. The problem is that the car does not have a fender tag or broadcast sheet, so I am trying to recreate what options this car was built with, to the best of my knowledge based on the evidence the...

I have a simulated woodgrain steering wheel for my 1970 Roadrunner, but I just have the wheel. Does anyone have an exploded view diagram of the pieces I need to install the horn? OR Can you list the parts? For a complete wheel, you need: Steering wheel "Retainer" ring Horn Pad Emblem...