Search results for query: *

My wiper system has decided to self destruct, (which is a problem since the '72 SSP my preferred daily driver over the late model Ram). Long story short- the driver's arm and pivot splines are toast. I don't want to pay out the nose on ebay for another set that might also be worn out so I was...

I have the cable remote mirror on the driver side, but the passenger side mirror always needs adjusted and is a pain to deal with. I was wondering if anyone has gutted a late model power mirror set up and retrofit it in our mirrors?

Anyone know of an off the shelf vent that will plug into the upper A/C vents for our cars? Mine are toast; They don't stay open, fins pop out and my wife keeps mentioning them when we are out for a drive. This is the closest I have found, but the are going to be undersized...

A friend of mine was in the junk yard today and sent me some pictures of a pair of Satellites headed for the crusher. The yard is near Columbus Indiana and they apparently will sell parts off the cars, but not the whole thing. Looks like some usable fenders and doors. Basically complete cars...

Has anyone upgraded their 3 point two piece shoulder belt in a 71-72 car to the single piece style like used in 74 & up? My original two piece belts are ok, but the passenger side shoulder belt connector doesn't hold the belt to the buckle tightly. My wife doesn't feel safe with that so it needs...

Not sure if anyone saw this, but it looks like a lot of the concept car recreations that the Beinekes built are up for sale on this site? https://www.revmusclecars.com/vehicles I remember getting the issue of Mopar Action with JETX on the cover in high school and it is probably one of the...

I am adding an A/C box out of a 94-02 Ram and would like to used more factory looking and fitting controls than the ones out of the truck. B-body controls seem hard to come by, so does anyone know if the 72-up a-body controls will fit in the B-bbody gauge cluster? Any other options? Just...

I have a factory rear sway bar set up for my 72 but I am missing the mounting plates. Since factory plates are approximately impossible to find, Im thinking of trying a 69-73 Mustang/Cougar plate since it has mounting holes in about the same location and the sway bar set up looks pretty similar...

My father is putting the weather strip on the roof rail of my car and asked if I could get a picture of how it installs around the back of the quarter window. Could someone with a 71 or 72 plymouth snap a picture of how the weather strip, fuzzies and everything else come together? Thanks.

Has anyone managed this? My 72 rear valance is solid, but extremely wavy and dented. I would rather graft the top contour onto a 71 reproduction than fight with straightening it out any more.

I pass a junk yard on my way to work everyday. Today I was surprised to see a old car on a trailer at the gate, a 72 charger. Not in great condition, but not bad looking metal and body all there going by at 40mph. I was excited to someone saving the car. Maybe they were swapping in a magnum they...

My 72 rear valance was so beat up, I don't actually know what it should look like. I know the edge of the 72 is fitted to the bumper, but is the panel flat like the 71 valance or contoured on the ends to flow into the taillights? (mine seems to be contoured but it is really beat up)

Was looking at possible air grabbers and before I got completely fed up with fiberglass Camaro front ends costing as much, I found this: http://www.tuffwheelrestoration.com/airgrabber.html Air grabber shipped for just over $300 isnt too bad but does anyone have experience with them? Are...

1: Does anyone know where I could get the trim for the 71-72 satellite canopy top? 2: If not, could I make it by modifying the rear window trim or charger vinyl trim?

I'm working on the metal on my 72 Satellite. I have already repaired sever frame rot on the front drivers side and then safeTcaped it, rot on the front passenger frame, reinforced the inside of the torsion crossmember installed sub-frame connectors to ensure the car doesn't snap in half when it...

I know its not a b-body but brake system is the same as far as I can tell and I would like to put rear disks on my 72 Satellite at some point: My father's 74 Cuda has a SSBC rear disc kit installed. The car was originally a power front disc car. The kit had no pluming in it, only the hardware...

So I have 72 Satellite I am restoring with a 318 a/t and my father has offered me his spare 340 to use if I want. The 340 needs a good bit of work (Cylinders bored, heads refreshed and all the fun replacement parts). This would be a great engine but it is a little expensive for me at the...

Just wondering, has anyone put 73-74 roadrunner stripes on 71-72/ know where to get ones that work? I like how it looks in my head and I saw this model on the internet and that is pretty much what I would like. I have 72 a satellite with the satellite hood that I will put an air grabber in...

I just picked up a Roadrunner clone Satellite in August and I need to replace or fix the monstrosity of a hood that is on the car. I am looking for a hood that I could put an air grabber on some day. Like this one= This is the correct hood for my car but someone cut out the flairs and...