Search results for query: *

I want to check the accuracy of my gauge. There is like 3 gallons in the tank and haven been completely filled. On a 71 RR, can the sender be checked with it in the car or do I have to drop the tank and pull it out? It should read 73 ohms + or - 12 ohms empty. Full should read like 9.6 + or...

Does the lower cover covers the whole lower mount for the cassette player? Was there different height of the covers? I know there is a difference between console and non-console mount (metal bracket). Thanks

71-72 RM. Did they ever have a FULL vinyl TRIM., going all the way to the bottom of the rear window, and quarter with the chrome trim?

On a 71 B, looking at the manual, do I get this right that the drip rail goes on before the roof seal? Does the anti-rattle clip go on in between the two? Thanks!

71 B-body. Does the curve part goes toward the window or inside? I think the glass rests on the curve? And it is placed just after the curve of the body? Also, does it go on before the trim or after? Thanks!

I thought there was an engineering drawing that shows the rear blackout decal. When placing the decal on the rear valence with cutouts, I thought a small portion of the top is folded onto the top portion of the rear valence, right under the bumper. Or just match it up with the top (around tail...

Anyone know the correct bolt, the size, or have any, for the buddy seat? I lost those bolts and am looking for 4. Thanks!

Hood mounted turn signals for a 71. Does anyone know and or have pictures of how the wires are routed on the underside to keep them tucked up and off the engine? TIA!

For a 71 B, is there a difference between the front and rear trim clips? Reason asking is first, I have new front and rear glass. The glass was put in when deployed along with the trim clips. Second: I tried to put the rear trim on but it won't go on. The rear glass looks like it's not...

Thinking of changing out my instrument bezel. Yes, no? I can't remember if it just pulls away from the gauges or have to go to the back side. Any advice/help/ is appreciated. 71 BTW. Thanks

How many per seat? Everyplace I look shows 2 but not clear if you need 2 or not. I saw pieces literally crumble apart and looks like on the inner dide of both seats. Thanks

Does anyone have pictures of the plastic splash shields on the front suspension on where they go (frame rail)? Is there four total? Mine were off of the car nd trying to find them and install. Thanks!

'71 RR, bucket seats, buddy seat. Did the buddy seat have seat belts or was it three in the back? It doesn't seem that if you have a lap belt for the seat, a shoulder belt, AND a buddy seat that there would be 3 total to the anchor point in the floor (RIGHT side, towards the hump if sitting in...

Hello all: Anyone have a picture of how the center horn is hooked up inside the column to make the horn work? I know the column is grounded to the dash but I can't remember where the center of the steering wheel ground gets hooked to. I think it's to the screw in the upper right of the...

I'm getting ready to install the seat belts in my 71 RR with orange and black seats and it has a "Buddy Seat". Does that "Buddy Seat" gets a seat belt or not? I think not. There is a lap belt for the driver and passenger, and a "shoulder belt" for both. So, there is 2 separate receptacles...

Does anyone have pictures of the routing for my RR? I can't seem to find my pictures and I think my clip is missing underneath the car. Where does the cable go through firewall, etc ? Any pictures will be helpful! Thanks

I'm looking into purchasing factory repop Rallye wheels just to have and to put on when going to a show or just for the look. I took one of the current wheels off and I measured from middle of the current wheel, to the lip and came up with 5" backspace. Looking at repop wheels from Classic and...

Man, seems like it's always this and that, never ends. Anyway, my 71 RR with a 8 3/4 axle was bent at one time. The guy that rebuild the rear with new gears, true-track, etc in it had to cut and straighten and weld it to make it true. Well, I guess there's a leak around the weld and at the...

Some of you may of heard of Digi tails. You can Google if interested. Anyway, a guy name Matt sent a email response and I thought I'd share if anyone is interested. "Thank you for your interest in DIGI-TAILS Digital Taillights for your car. We are constantly developing new lights based on the...

Bought a set for my car but havent installed them yet. Was wondering if anyone has and how was the fit/finish of them are. I did put one on a wheel well and think I might need to "massage" them to work. Thanks