Search results for query: *

I’ve searched here several times and nobody answered my post a while back. I am putting front bars on my 63. The motor mounts were already cut off the k frame and it was previously modified. I plan to do Fender Well headers. We already replaced the floors and bottoms of the firewall… so not...

Springs moved inboard, Caltracs. +1 split monos, rear sliders. MT 295/65 r15 on 15x10 5.5” back space. This will be mini tubbed too, but this will be ‘Street combo’ Getting a mild roots blow 440

Hey guys tried searching, but no luck. I’m using the USCartool spring relocation and mini tub kit. Going with Caltracs and split monos and sliders. My 67 R/T is a Super Stock spring car so I want to do something different I here the sliders lower by 1/2” Anybody doing this? I’m running...

Hey guys. It’s been a while since I posted here. I recently have been going to the track with my 67 R/T. I had about 8 practice passes on 1/4 and 1/8 mile local tracks before attending a YouTube car event. I went to the first NoNameNationals YouTube event Sept 30- Oct 1st at Jeffers Raceway in...

Got this car recently. Has been a drag car since 1969. Was running 11.45 1/4, 7.2 1/8. Current Engine is a 500ci low deck. Had OTB Edelbrock RPMs, Performer RPM dual plane, .510 lift cam. pulled engine for new bearings, putting in an Ultradyne NF 69 cam. Heads getting ported and a port matched M1…

Need brakes, shocks, radiator, wiring, and polycarbonate/Lexan windows. Would like to try and make it to Zip Tie Drags.

These are kinda beat like my car. Rears are 15x10 with 6” bs, fronts 15x3.5. Ordered Hoosier 29x12 slicks. 13.7 cross section. About 2 inches wider than the MT 295/65 r15s on 15x10 5.5 bs seen in this picture. I’ve got little over 16 inches of clearance.

This won’t be a dedicated Drag car. When it does goes out in public I want to run these seats as they fit the theme of the car. My roll bar will have a bar behind the drivers seat to attach the harness belts , and we are waiting to add the side shoulder bars. Has anybody ran the harness through...

A YouTube update on my Coronet Drag car.

Super Beat should be back on her wheels by next weekend! Then it’s subframe connecters and roll bar...might not be driving this season, but dang i’m Stoked. The engine, and fab work are being done by local racing legend Gary Hedden of Magnum Superchargers out of Cedar Mn.

What shocks are you guys using with Superstock springs? I’m putting Caltracs and a Dana in the Coronet, but I’m putting the 8 3/4 suregrip with SuperStock springs in my Satellite.

Just can’t bring myself to cut this up..

Gary is about finished tubbing this Satellite Wagon. ( he is not doing the rust repairs ) Then I’m next!!! But I couldn’t resist test Fitting my wheel. My narrowed Dana is 1” wider than this, and I’ll be using Caltracs

GARY is building my custom length Dana 60, doing spring relocation and mini tubs starting next week if all goes as planned! will be doing cheap rear disc brake conversion at this time as well.

So this Happened today... will post video to my YouTube Channel. Had a leak at the front of the oil pan/ bottom of the timing cover? Sooo that will be fixed. Otherwise made 4 pulls. They adjusted the timing from 36 to 34 once which dropped a couple Hp so stayed at 36. The Wilson spacer gave the...

Ok, I have a plan to upgrade my 68 Satellite. I just bought a pair of weld in subframe connectors and have Mopar black OE wheels with 295/65r 15s on 15x10s with 5.5 back space on the way. May have to roll the lip or do the spring relocation... Anybody running this combo? I saw Snakeater ran this...