Search results for query: *

I got the headliner on the bows and have them turned up and was in the process of setting the liner on the teeth when I suddenly realized that the row of teeth half way down the sail panel were at a different angle then the teeth around the rear window. So do you have to glue the headliner to...

I have the headliner on the bows and the clips in place, I just can't seem to get the bows to flip up. Do you go from the back to front or front to back? Also, do you try and turn all 4 at once or one at a time? 73 charger - 4 bow

just put in new carpet, what is the best way to cut the holes for the seat bolts? Was thinking of using a drill, then realized it would tear the carpet.

Anybody ever make their own for a 71-74? Seems REM is the only maker of package trays and theirs is 58 1/4" and my cars opening is 59 1/4" which leaves around an inch gap in the front, the depth on theirs is perfect. So I was thinkong about using the one I got that did not fit as a pattern...

Has anybody used yearone package tray w/slots in their 71-74 charger? Looking only for 71-74.

Anybody install a headliner into a 73-74 charger? If so, can you give me some tips?

Putting my dash back in and I noticed the paint around the gauges is looking pretty bad. So what is the best way to paint for someone with not the steadiest of hands? Also, what type of paint do you use and what color? Mine looks to be silver, so I was thinking of using modeler's silver...

I am wanting to rebuild my diaphrams and I need to know is there a place that rebuilds them or somewhere the sells them new? I did a search and came up empty. But these are the vacuum operated ones that open and close the air flow doors.

I just got new panels and they did not come with the holes cut out for the ash trays. Does anybody know of a clean way to cut the holes out? I would like to make them neat. For those looking, I got them from Dashtops.com and they were $229 + shipping. I have matched them up to my old ones...

Does anybody know how long the cable is for a 73 charger? I was looking for one and there are 2 listed, one 69" and the other 84". Thanks

Anybody had their mirror restored, i.e. new silver backing? And if so, where?

I just got parts for my 73 charger and am both happy and sad. Seat covers were really nice, though the buttons are only held on by a metal wire, same way manila envelopes use. Trunk divider did not have the cutouts for the seat latches, so I have to cut those out myself which I could have...

Need one for a 73 charger, anybody know where I can get one?

How hard is it to dye the vinyl on the dashpad?

I bought earlier this year a dashpad from Dante's, it fit very well but some of the studs were stripped and the 2 clips were loose and the plastic inserts you screw the metal dash panel into were missing. Plus, vinyl was the wrong grain pattern, but before I called them about these problems, I...

I have an A/C car and I need a bracket to bolt the flow control door to the actuator arm that moves the door. The backet is missinf on my car, the is the flow control door on the lower left hand side of the box, just below the heater core, the door molds itself around the arm and there is a...

If the card board part is the sail panel on my 73 Chrgr, what is the plastic piece that goes over it called? Talking about the pieces that go over the rear pillars, there is a cardboard piece and a plastic trim piece that covers it.

I need the formed foam for my front seats, does anybody know who does this? Legendary does not, I already asked.

How do you get those darn seats out?

Where can I get a ash tray for a 73 charger.