Search results for query: *

Hello, old topic but I can't find the answer I'm looking for. 68 Road Runner, stock hood, low deck BB, TFS Heads and Manifold, no hood insulation. I ran into some hood clearance issues. I have a combination of a drop base air cleaner and 2.5" filter that gives me ~1/2" clearance between the hood...

Sorry to start another thread but it would be good to have some answers to an old question. I have read the existing threads on here but need some fresh comments. 68 B Body, 4 wheel manual disc, manual trans. Basically, is it ok to install the line loc solenoid right after the master cylinder...

Hello Gents. As some of you know my younger son just acquired a 72 Duster that has been sitting for a while, from a family member. It ran fine in 1989 when it was parked, outside, in dry Colorado. We have full access to it and will haul it back to the shop when we want to start the rolling...

Does anyone out there have any input or a blow apart diagram as to where the various fasteners go on a 68 fender? The fender bolts are fairly obvious but the stud and nut fasteners are confusing the hell out of me. I tore it apart quite a while ago and the pictures I took aren't as good I...

I have been doing a little poking around on here trying to figure out what you guys feel are the best wiring harnesses for our cars. The consensus I came up with is that M&H / Year One is the best deal / quality / fit / correctness out there. Would you guys agree?

Looking for suggestions on under carriage coatings for my Bird. The car has been media blasted, epoxy primer, the phase 1 body work is done, and will start finishing the under carriage first. I paid good money to have the old under coating blasted off and don't like the idea of simply putting a...

Can anybody tell me what the difference between the Sequence Number in the upper right hand corner and the Sequential Number under the VIN section mean? What's the difference?