• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. Robliepse

    Before and After photos

    While researching my backward caliper issue I was looking as some of my old pictures and thought it would be interesting to see some before and after photos of our cars.
  2. Robliepse

    What am I doing wrong, this car is killing me..........

    I finally worked through my pulley and belt issues and thought...it's all good from here. Install these motor mounts and install the engine, trans and K-Frame in the car. Now the center bolt that is part of the engine mount is hitting the block. I have an old set of mounts with a shorter bolt...
  3. Robliepse

    1977 vs 1972 motor mounts

    why does it have to be so difficult? Trying to get my 440 into my 1972 Roadrunner and I noticed that the both that holds the bracket to the mount was hitting the block. I found an older set that had a shorter bolt and they fit. Cool, Year One is about a mile from my shop so I went and bought a...
  4. Robliepse

    Stumped on the dyno

    Prior to installing the 440 in my Roadrunner I decided to bring it to a local shop to have it broke in and tested on a dyno. It's the same shop that did the machining and some assembly last year and they are a busy shop and appear to know what they are doing. The engine started just fine, they...
  5. Robliepse

    I bought the book, hold my beer and watch this

    Going to take one of the bucket list. There are very few bolts on a 1972 Roadrunner that I haven't touched with the exception of building a motor. A few months ago I picked up someone else's well documented 440 project and I've decided to do the work myself. I have the receipts from a local...
  6. Robliepse

    Has the motor ever been apart?

    Are there any strong clues that I could look for to see if the 440 that's in my GTX has even been taken apart? The engine bay and engine were incredibly dirty and nasty and I've verified the block, intake and exhaust casting numbers. I've also noticed that these some type of aluminium foil pad...
  7. Robliepse

    Odd cuts in my 1972 440 K Memeber

    Does anyone know anything or have any idea what caused these cuts / areas on my 1972 440 K member? It looks like they were intentionally done. Up until now I was somewhat convinced that the car had never been apart but now I'm not sure
  8. Robliepse

    Vacuum door on the bottom of my air cleaner

    What controls the opening and closing of the air door on the bottom of the 4 barrel non-air grabber air cleaner on my 1972 440 Roadrunner? I just purchased the car on E Bay and it has a stock looking single snorkel air cleaner with a disconnected air door on the bottom. I understand fuel and...
Back
Top