Search results for query: *

This question is directed to dadsbee A while back I saw a thread that you used aVHT roll bar and chassis black for your cleaner base Was that a satin or gloss ? Thanks in advance dcmason69

What is too high battery for a 69 Coronet N96 hood? Can a person use a 8 inch tall battery and be ok? Looking to put a AGM in

Any one have a source for the correct size washer squiter hose for 69 Coronet? Measures about 1/8 Id. 7/32 Od. Thin wall. Thank you dcmason69

The nozzle hose across cowl has 2 holdown clips do they both point back or the right side foward and left side back ? What is right dadsbee? Thank You dcmason69

Restoring rear license plate bracket on 69 Coronet, what did these look like from factory as far as paint or plating? Had to take mine apart from the pivot pin and spring in order to straighten both pieces has old black paint on back side but I don’t believe it’s correct! Any help...

What’s a good quality upper and lower Rubber bushing? Iam thinking it’s probably a crap shoot anymore, mostly all manufactured over seas ! What have you guys used that you had the best fit and quality ? MOOG. FROFORGE MASTER PRO MOV0tech AC DELCO and the list goes on. Thank you...

Painting 69 440 engine Hemi Orange does dip stick tube get orange also? also handle on stick? What is factory correct?

Any one seen or know about angle pad valve covers ? What engine and year used? Any info? dcmason69

Can any one tell me the difference between a repo 7 blade clutch fan and factory? 2863216 do the factory have 2863216 stamped on all the blades? I see another stamp # on flat near the big hole at hub looks like 46237 with a small pentastar above it I am hoping that this is a factory fan...

Adding a N96 hood to 69 Coronet with power disc. do I need to be concerned with Ramcharger duct clearance, or is that only on cars with HEmi engines that there was a special shape to the left hand duct ? I have the regular 440 ramcharger duct work now. thank you dcmason69

Need 7 blade clutch fan Do I get new Chinese or Go orig? Are the 6 blade Derale fans work as good as 7 blade 2863216 is Mopar # are the ones from Mancini Chinese? Thanks

Had my cluster rebuilt by Auto Instruments it came back with out the capacitor that runs to the hot side of voltage limiter. When I asked them why it was omitted they say that it is not needed with a electronic voltage limiter, its only function is to eliminate radio noise when used with a...

Can anyone recommend a booster rebuilder? Is Ram man still good? seen some reviews that have me concerned. dcmason69

Has anyone had any dealings with reproduction upper wood grain mouldings on a 69 Coronet door panel? I am considering adding these to my door panels I just got from Legendary, I am on the fence on wheather to get repo ones or try getting original good used ones? my main concern is the mounting...

Looking to get Bumper done, where is a reputable place ? will need minor dent repair and plating. Appreciate any help dcmason69

Getting ready to have my gauge cluster done, have found several places to do this but some will use the vinyl overlays and some will silkscreen. I know that it is my car so i can do what I want but would like some advice on what looks the best and will stand up. I have a 69 Coronet rally dash...

Looking to upgrade my AM thumb roller to AM/ FM with the Aurora electronics. Does any one have any advice as to best service to deal with the ones I am looking at are Classic car radio restoration in canada, or Ricks radio conversions and I see there is one called Joes classic car radio. I...

Can anyone tell me the quantity of clips used to attach the left and rt. side garnish or trim mouldings that run along sides of headliner, these clips slide into the mouldings and attach onto the pinch weld. This is on a 69 Coronet Hardtop I am unable to reference these in the FSM and I do...

Has any one used D and M Restoration for their dash cluster? I am looking for a reputable shop to do my 69 Dodge gauges. I know that Instrument Specialties is used by some people but I would like to find an alternate. Any help appreciated

I want to reinstall the factory sway bar in my 69 Coronet using the energy suspension sway bar bushing kit that replaces the factory ones. Can anyone tell me does the hump on the bar go upwards over the brace that runs between K member and radiator support ? if I remember this is how it is run...