Search results for query: *

As I button up this engine swap, the 383 is sitting comfortably in my Scamp with it's fancy (EXPENSIVE) tti headers. I was running the fuel lines in their factory spot and were fine with HP manifolds, but I had to lower the line because the fuel hose from the steel line to the fuel pump was...

In late 2020, I purchased an AutoMeter “Street Tach” ATM-2895 from Summit for my '75 Scamp (I know, an A-Body). However, I did not install the tach until almost a year later. The tachometer was installed/mounted on the A pillar. Within six months, the glass lens and bezel literally came off! I...

So the latest in my quest to keep this Jeep on the road, I was informed of a power steering issue and leak. I have a rusty line on the steering rack and pinion unit. I thought, ok, I'll replace those two metal lines. Nope. I can't find any part for this application. Are my only choices: make my...

Well, I created this lovely mess today. I torqued to FSM specs 15 Ft. Lbs. The rubbery gaskets that came with the MP windage tray squished out under a few bolts... No way will this F'ed up combo will seal. :BangHead:

The oil slinger is installed with the wide portion facing outward toward timing chain cover? Also, I reused my old one, and it just slipped over the crank kind of easily. Is it ok for it be loose, or should I toss it and get a new one?

Hey everyone! What the F is the deal with this plug that came in my Milodon freeze plug kit? The original one I removed has a much larger sealing surface area. Are there any on these out there wider than this Milodon plug? I'm actually half considering flattening the center of the old one and...

I've been meaning to post about the newer Mopar Performance being sold out to "Proform". A quick check on the Proform website shows aftermarket crap for the Chevys and Fords as well. Now MP is reduced to a bunch of Chinese ****. Sad.

Having a tough time here. Anybody have any tips or tricks to install these lines on my 68 RR?

Hey fellas, my '68 Road Runner has tabs for the upper portion of rear seat broken. You know the metal tabs welded to the floor area that go through the loop at the bottom of the upper seat frame and holds it down then you pop in the seat portion after? Later cars utilized a bolt to hold these...

Hello guys and gals, What is the difference between the bench seat and bucket seat retracting male lap belts? Is one longer? which one? curvature of the base? Help.

Here's a local ad for a "rebuilt" 400 and rebuilt 727. I talked to the guy who told me, the "rebuild" consisted of at home hone, rings, cam bearings, cam, fuel pump, oil pump, distributor, aluminum 4 bbr intake and Edelbrock carb. He seems real flexible on the price. The tranny he said was...