Search results for query: *

Hi Friends,would anyone have a pic of the wiper linkage ,and the proper park spot for the motor,I repaired my lower and upper left side ,on my 65 Belvedere,and im hopeing i reinstalled the pivot properly before i install the dash,thanks for any help Paul

Im working on a 1969 GTX 440 cu,is there a special bolt for the motor mount,A pic would help.It seems the bolt that runs through the mount seems to be smaller than the hole ,Is there some type of bushing to fill the hole opening Thanks Paul

Anyone out there ,ever heard of Mopar Interiors in Harrison township ,Michigan. Do they have a web site Thanks Paul

Hi Mopar friends,i need a little help,i need to remove the top of my steering box,were the return line goes onto ,it seems to be leaking,i installed a new hose ,and it still leaks ,so im thinking the spout were the hose clamps onto maybe cracked.can i expecked any surprisses when i remove it,or...

I had my tranny redone this winter ,a new seal replaced on the kick down shaft ,and now it is leaking again,is there a temporary fix,for this.i think i will remove the tranny this winter and replace it with a newer style.I would like to make it through the summer without takeing it out Thanks

Hi ,my friend has a Challenger with a 440 in it.The problem is when he starts it it idles okay ,has soon as he puts it into drive it cuts right out .It is an auto transmission.anyone ever ran across this problem.Thanks for any help Paul

Hi ,hope you can help me,i installed a new speedo cable in my Plymouth,It is the type that has the o ring on the end and slides into the tranny.My problem is at low speeds the needle jumps from 5 miles to 50 miles per hour.Is there a special way to install this cable.I tryed to install it the...

Hi I have a 1965 plymouth belvedere with a 318 poly.It has a four barrel carb ,550 edelbrock and im looking for the best plug to run in it,any help would be great Thanks