Search results for query: *

On my 67 GTX the date code is 706. So my question. If the model year changes in August is this car a late production 67. Does that date represent July 6 1967 or am I wrong and it represents July 6 1966

I’m about ready to put the #1157 bulbs back in. First I had list directional operation. An electronic flasher resolved that. Went to a show over the weekend, left real early so I had parking lights on. I was told my brake lights are not working. Turn off the parking lights, brake lights work...

I switched to led 1157 bulbs in the rear of the super bee. Bulbs light for brake lamp and tail lamp operation but will not blink when directional is selected. Is there a different flasher that needs to be used in conjunction with the led bulbs?

This pertains to a 67 Coronet RT. I plan on taking it to Mecum Harrisburg to see if I can move it along. I’ve always believed it was a matching numbers drivetrain but the info on the engine tag and spd on the fender tag has me confused. Or I’m not decoding the spd correctly. I’ll post pictures...

On 67 Belvedere door hinges. They don’t utilize bushings. I disassembled and bead blasted the parts after I drove out the old pin. The wear is in the inside part of the hinge not the pin. The dorman kits I purchased have bushings. I’m a little hesitant the drill the worn half of the hinge and...

Could someone with a parts catalog look up the part number for the horn ring retainer used on 66 67 B bodies simulated wood wheels with the soft material horn button/cap. It would make my search much easier.

Back in August I sent in a request for information on my 67 GTX. Never received a response, are they still providing info on cars?

I was looking at what appears to be a very nicely restored 67 GTX Convertible on their website and also on eBay. Do any members have any comments or previous dealings with Classic Cars of Sarasota?

I bought a 67 GTX last year, I noticed that it had an inexpensive carpet installed (glued) to the original carpet. So I had this hope of pulling out a build sheet. Went at it today, I actually did find the tattered remnants under the front passenger carpet. It was in poor condition and is...

Sorting out parts for Carlisle. Came across this fan clutch, hands lots of makes and models over the years . Tried searching the ink stamped number came up empty. Is this a Mopar piece or just an aftermarket clutch?

Sorting out parts for Carlisle. Came across this fan clutch, hands lots of makes and models over the years . Tried searching the ink stamped number came up empty. Is this a Mopar piece or just an aftermarket clutch?

Bought a 67 recall steering wheel a little while back finally got around to installing it today. Once tightened up I checked the horns operation at it would sound and not stop unless I turned the wheel a little bit. Ok, I removed the 3 screws and found that the horn switch was bad as there was...

I tried shooting an email out to resto rick to have my hood hinges restored, but it bounces back. Does anyone have better contact info besides the email address posted on his website?

patient is my 66 hemi coronet 4 spd. I removed the holley sniper set up I ran last year and put the dual quads back on. When I did the re install I had the carbs rebuilt by a professional, bought a new jegs branded distributor that is setup to plug into the mopar electronic ignition it uses. Re...