Search results for query: *

I've done a quick Google search but looking for more of a "I've used this guy" response. I'm needing small parts, basically nuts and bolts, zinc plated and looking for a quality job. If the person was in Ohio that would be even better. When I restored my Roadrunner I used a guy who's name is...

From a stop 4- speed not wanted my to go into gear and does grind a little going into reverse. First off it's a 71 440-6 RR 23 spline. Trans rebuild and new clutch. The crank did require the undersized .914 pilot bushing. There is plenty or room for the input shaft, the clutch checked and spins...

What exactly did the vacuum advance cans do that had the electric solenoid ? I read they retarded the timing under certain conditions. I have a distributor that has on one it and plugged it in and it advanced it some so I'm confused. Also read the 2 wire ones were wired into the idle solenoid...

I'm looking for correct rubber bushings that go on the bar, not the end links. I have looked on e-bay, Classic, Year One and a general Google search. The original bushing the hole is offsest more towards the bar. What I am finding and also what I have on the car is the hole in fairly centered...

My resto battery purchased from Antique Battery in Ohio finally crapped out. Their resto batteries is actually hollow with two smaller batteries inside. I've carefully cut it open to see what was in it. These little orange batteries can still be purchased but for the cost of 2 it's just as cheap...

Title meant to say 73/74 Not to start a hate club here and I know to each his own but I've wondered for years, what the hell was Plymouth thinking with the body on the 73/4 2 door Plymouth. The RR has a great looking hood, then the designers can't match the front and rear wheel lip contour ??? I...

Is there a data bank or anyway I can find out or get a rough idea of the build date without the fender tag or door decal, can it be guessed by the sequence in the serial number ? And please don't suggest contacting Galon. It's on a 71 RR

Discussing special brackets such as floor mounted shifters, bucket seat plates, torque boxes and not sure what else, how did the assembly plants weld these on, did they use stick or mig welders ?

Not sure if this is the right section to ask this but has anyone seen another Air Grabber switch handle like this ? It was on my 71 when I bought the car. I removed the handle from the switch and replaced it with the more commonly seen one. Out of all the 71/72 RR airgrabber cars I've owned I've...