Search results for query: *

Thanks for any help

Do you need the oil adapter for the filter if you run headers on a 318? I believe you have to if running 340 exhaust manifolds what about headers?

So the charger steering wheel is hosed and I have another 70 wheel but its dark green. It needs to be black. Has anyone ever painted a steering wheel ? Product used? thanks Dave

Ok please tell me,I know they are both 1 year only and I seen someone posted that they are different. I think they are the same. 1st pic coroner 2nd charger

https://www.google.com/search?client=firefox-b-1-d&q=rislone+zinc+additive

1970 Bee oil gauge is off,this one says 7 psi and was supposably calibrated the other one read 20 psi. Replaced oil sending unit twice. Installed mechanical gauge and have 75psi cold and 50psi warm. Is this common on these rally gauges? All new wires on the Bee.

My question is will the outboards start to open up if the car is in neutral and you rev it up to 3000 rpm? I was reading on a couple forums there has to be a load on the car for them to open. I thought vacuum opens the outboards. I trying to diagnose a problem on my setup. thanks Dave

Anyone have any feedback?

would this be correct?Truck has AC

Can I pull it without taking the cluster out,from under the dash? Just wanted to see if anyone has done it. Got my quartz board and want to install it. Only 3 screws.

Ive noticed a very light oil residue on the lower part of the air cleaner,Also my friend said the same on his. What causes this to happen? Thanks Dave

So Ive looked around and from what Ive read I guess dodge used this shifter in A and B bodies. Is this correct? This is in a 68 charger rt and is a 1 owner car.

A friend is looking for a replacement tank for 68 dodge coronet 383 auto. I havent bought a gas tank for a long time so could someone point me to a good place. I know there are some junk ones-rust inside in a month or two- thats why I asking. thanks

So I went to put my intake on and started 2 bolts on one side then went to the other side and it would not go.So I pull up the intake and look at pan. Bolt holes look tight but looks like it should work. Try again and no go,so I pull the valley pan of and set intake on and I was able to put 2...

So I plan on installing my edlebrock intake. Its been a while. I believe valley pan sealed at the 2 bars and black rtv on corners. Do I use sealer around the ports? Thanks Dave

I have a 1970 cast intake and an aftermarket edlebrock intake. I noticed the edlebrock is a 1/2 taller,will this be a problem with my ramcharger hood? thanks 1970 Bee 440

dash is black and fresh air cable is on drivers side. I thought Bee had the wood grain rally dash. Big money for this car. https://www.ebay.com/itm/1970-Dodge-Coronet-Super-Bee-/283488245054

1969 440 want to add a oil gauge and wanted to see if there was another spot. thanks Dave