Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Soo.. finally got a timing light, got a Innova 3568a, never used a digital light before, hooked it up and had to advance the light to 45 degrees at idle just to get the line on the balancer to zero.. at 2500rpm i was at 65 degrees, this seems a bit off. Balancer line is at zero with the piston...
So, i'm cleaning rust/replacing bad metal in my 62 right now and while my shackle boxes are a disaster (getting better though) My frame rails from the outside are very solid, no holes found yet but that will prolly change. After seeing how bad the shackle boxes were inside i want to try to save...
so, i bit the bullet and started cutting rust out of the trunk on my 62, it's just small spots 2x3" or so over the boxes the rear spring hangers are in (not sure the exact name of the part) So.. when i removed the rusty trunk floor, the box was full of scale, i vacuumed it out and it's not...