Search results for query: *

Yes, I know. It keeps getting called a "pony car" and compared to the Mustang and Camaro. But despite being named and shaped after a vintage pony car, the Challenger is plain old mid sized muscle. How many pony cars weight 4000 pounds and have buckles for three in the backseat? I know...

My 74 original was frozen, (had been outside in a pile for years , thanks previous owner), I got it freed up after a few weeks sitting full of PB Blaster, but it would not sound right. I drilled out the rivets and got the inside cleaned up real good, and back together, but no matter how I...

just getting a 1200$ or so replacement block. My 74 RR coded for some cool stuff like buckets, console, sunroof, etc. but was a 318 car. I had planned on a well built 350ish HP 360, or 400 HPish stroker 408. My 13 year old daughter is interested in the car and thinks it is neat. While...

My 74 RR sunroof headliner was trashed. The rear half was sort of intact, but so dry rotted looking at it, let alone touching it would turn it to dust. I am using the original, undisturbed bow order and location after just pulling the dry rotted headliner off of them. I got...

this engine? Random 318 LA smallblock tossed into stalled project to make it at least a yard driver to sell... late 70s/early 80s factory 318/360 4bbl intake tossed on un sexy, un cool 4027593 318 heads lifters clacking like crazy eddy carb and what looks like no hope of getting my...

road worthy... 1974 RR most importantly, are there supposed to be shims or something here at the upper control arm shaft? I don't want to lean on it anymore than lug nuts and strip them, but car raised up on jack lowered and full weight of car on tire That's like an inch...

found in trunk of 74 RR, I am guessing remote starter for underhood work although could be a horn relay that lets you hit the horn from it do any of you recoginize it for sure? no part numbers on it

it was in the trunk of my 74 RR. I used a half inch screw to attach the ground strap to the case. It has the blades for the multi connector from the harness. It does not have the blades for the two single blade connector wires. I got a washer resovoir and pump, which I...

inner screws screw into tabs on the grille? the edges of my grill are cracked where it tucks under the bezels and there seems to be no place to screw my inner headlight bezel screws. if this is the case, does anyone have pictures of the edges of the grill and the screw tabs? I need to...

meep meep horn set up and harness installed? I got mine out of the trunk, and working. But need to see where it goes and how the harness is. my engine harness has been hacked in a few places. like here I think to jumper off the seat belt set up. here as the factory two barrel is...

that makes a popping noise when it gets power, but no beep? if i get this working it will save me 80 bucks or so thanks for any info

Ok, the good news is I have turn signal, headlight switch on power to rear and side markers, and brake pedal power all going to my tail light harness connecter in the trunk working as it should. The bad news is, between the shaved side marker lights, and several other hacks, I am having...

on my 74 Roadrunner I am getting new lights, but the 2 and 3 prong connecters are lined up opposite of what I thought. which way from the factory?

I am looking at doing my garage floor. Probably not willing to do the everything 7 days outside epoxy treatment. I can find tiles as low as 1.69 sq foot, not sure how good it is. roll out matting at about same. I have typical two car garage, about 400plus or so square feet. Goals...

the 74? It has that huge, dome vent thing and the tanks cost twice as much as others. I was wondering if an ealier tank without the dome would fit in place instead.

Well, I had gotten pretty sick of GM A bodies and what a pain the underdash AC duct is. That is my pet peeve with them. You can't do a think under the dash without dropping the whole ducting. On AMC, on a Javelin, the cowl is only accessible through the dinky hole the wiper motor goes on...