Search results for query: *

Kind of curious out there what people are using now on your hydraulic cam selections for a big block 440 Mopar. What cams are you using there are comparable to the Mopar 292 509 purple shaft cam.

Can I ask what springs you all are using with the Mopar 312/590 on factory heads. Any help with tech info would be very appreciated.

Okay first off let me state I am not looking for a throttle cable for a b body there was a post on here a week or two ago someone was asking about a throttle cable this is the part number from AutoZone that I use on my 66 Plymouth Satellite with a 440 in it hopefully this will be able to help...

Hey guys I'm posing a question here I'm currently running the Indy 1.6 rocker arms which I have faced the current issues as everyone else has what are there breaking so I am looking for new rocker arms. I had a friend of mine tell me that Mancini racing sells 1.5 and 1.6 rocker arm and that...

Ok guys today i was putting my stuff back on my 440 motor on a run in stand and i set my high dollar Powermaster 100 amp on the work bench and it rolled off and Cracked the back case on it... So with that said i have been looking to fix or Replace it with the Denso 60 amp Alternator Swap i hear...

Ok car guys what works good at removing Buildup in Aluminum Heads in the Intake & Ex ports where my Valve seals where bad .... I tried WD-40 and carb Cleaner any help would be good just don't want to use anything on it that will cause Damage to the heads.

Hey Mopar family i am in need of some help i am looking for a Specific hose that is very hard to find so if any of you out there know of Companies that specializes in hoses in your state or a different country please help me out here are the Measurements. 3/8 ID x 9/16 OD its a very soft...

I have a 1966 plymouth Satellite the car with a power cut off Switch mounted under the car on the right side i was wondering where other have mounted there switch at i want mine to be out of site.. Just to make it clear its the power cut off switch not just a switch to cut power to the Ignition...

I was wondering if anyone out here would have the actual Cam Card for the Mopar 312/590 Cam so i can see all the info and what the Valve lash should be hot & cold..Thanks for any help.

what would you say about using automatic trans fluid in a A833 or use the regular gear oil i have heard some are using the auto stuff just wondering...

So i was wondering have any of you used solid mounts for street use or have you used 1 solid & i rubber mount what say you good idea or bad idea i guess the opinions will vary.

I am getting ready to run a Crankcase evacuation system on my street car i read where it could junk up your mufflers how many out here run it and has it caused you any issues so far... :) :headbang::headbang::headbang::hello2::hello2::hello2::hello2::):):):)

So what would you say about a Stroker motor what would you use and i know not all will agree but that is America we have a choice... so what say you......... :) 440 block with a 4:15 crank OR 400 block with a 4:15 crank...

Its been 5 years since my friend sam took his car to bare metal and fixed all the bad spots and got a new paint job & undercoating then we did a new suspension and added a Dana 60 rearend along with a new fuel cell & 1/2 line and all new fitting and a ( KILLER 572 STROKER HEMI backed by a 18...

So share what it was that you did good or bad in rebuilding your car and be honest no matter how embarrassing it may have been... :headbang::headbang::headbang::headbang:

So i have a question do you prefer to listen to oldies like 50 & 60 or do you like listen to the 70 & 80 rock music or whatever music it is that rocks your boat while out in your mopar......... :) Or are you like me and have no radio playing and want to hear the sweet sound that your ( MOTOR...

Let's see all those cool glory day vintage race cars race haulers of 60 thru the 80 POST ALL THOSE VERY COOL OLD SCHOOL MOPAR HOTRODS OF THE GLORY DAYS AND THE HAULERS THAT TOOK THEM TO THE TRACK SHOW OFF OUR MOPAR HISTORY.. :)...

So here is the the thing i just converted back to a Automatic and i am using the Cheetah SCS Shifter well the factory trans lines are in great shape but i have bent the lines to make room for the Cable & Bracket but i was wondering have any of you guys made up a set using something different...

Just my opinion but i have owned 2 1968 Dodge Chargers over my life and i really think its the best looking car of the B-Body Family of its time. Its got a very clean look front & back.... :headbang::headbang::headbang::headbang::headbang: So what say you yes or no..... :)

I have a 1966 plymouth satellite that had a 383 in it but now has a 440 with indy sr heads the same heads that where on the 383. The problem is the header on the drivers side the number 1 tube is hitting my torsion bar as it come down under the car and the collector tube area the torsion bar is...