Search results for query: *

I'm hoping someone might be able to help me out here. This isn't a B-Body specific issue, but it IS Mopar related. I am trying to drop the front driveshaft on my 2000 Dakota 4X4 to change out the U-joint, but have run into a giant snag. I'm posting here because I suspect I'll get more help...

I’m trying to figure out… A.) Is this my water temperature sensor in the first picture? I believe that it is. B.) Does it go in the open hole in the second picture? Most pictures I’ve found show the temp sensor in different places. I have swapped engines from a non-Ho 383 to a built 440...

Firstly, my apologies for cross-posting on other forums, but I'm hoping that casting a wide net will find someone who can answer. I picked up a gear drive for the 440 in my Road Runner, but when I removed the timing cover, I found that the cam that is installed is a single bolt type with a...

Forgive me for such a newbie question, but I'm stumped. I'm trying to convert from a 727 auto to a 4-speed in my '70 Satellite. I have a pedal set, but, for the life of me, cannot figure out how the clutch pedal overspring goes on. Here's what I have: The spring itself looks to be...

Hoping someone could throw out some help - I'm doing an engine / tranny swap in my '70 Satellite convertible, going from a 383 auto to a 440 4 speed. I had been thinking about ditching the power steering in favour of manual steering, and since I have the engine bay all open, I guess now would...

As a follow-on question to this thread - http://www.forbbodiesonly.com/moparforum/showthread.php?59006-K-Member-Question - I am wondering if I have to remove these bolts to finally drop the K-frame. I assume they hold the (lower control arm or something??) onto the K-frame, rather than...

I'm sure this has been asked before - I did try a search first, but couldn't dig anything up, so here goes. I pulled my old 383 / auto combination out the top, and would like to install my 440 / 4-speed from the bottom by way of raising the engine/tranny combo up through the bottom on the...

I have a 1970 Satellite project. It's NOT a Sport Satellite, just a base model - but it DID come with a 383 (non-HP, I suspect), 727 transmission, and an 8 3/4 rear end with 2.76 gears. My question - is there any way to tell if this is a Sure-Grip rear end without removing and opening it up...

I am pulling my 383 / 727 combo from my '70 Satellite and replacing it with a 440 / 4-speed. For the sake of simplicity, I'm thinking of replacing the engine wiring harness while I'm at it. Does anyone have a recommendation for a good replacement harness - preferably from the firewall...

Hello, all! One of my winter projects this year is to remove, clean, restore the rallye dash of my '70 Satellite, as well as install a "tic-tock tach" that I picked up this summer. My problem? I'm clueless and have no real idea where to start, or how to proceed. To that end, I'm...

Hello all! My appologies if this has already been beaten to death, but my 70 Satellite convertible has power windows and roof. I am now quite officially sick and tired of trying to figure out WHY nothing works. I think I narrowed it down to the electrical relay for the roof and windows...

I have to rewire the power windows and top on the 1970 Satellite convertible I picked up. The previous owner took everything apart, and I'm trying to figure out how it all wires back up. I have a mess of coloured wires at each window, and was wondering if there is some sort of diagram or...