Search results for query: *

I need to get a Cross Ram Intake, 2 Holley Carbs, Hemi stock exhaust manifolds, Hemi Valve Covers and various support parts up to FHO / Tim Banning in Ontario for my Hemi build and really have no clue on the best way to go about it. Would anybody with some knowledge of getting the parts across...

My March Serpentine pulley for the water pump is thicker then stock pulleys where it bolts on to the pump which is fine if I were using electric fans but I want to use my Viscous Hemi fan set up and the fan doesn't catch a lot of the center pilot on the pump (about 1/16"). Can the mounting face...

I have an Edelbrock Victor Series mechanical water pump that I was trying to bench fit my March serpentine waterpump pulley and Hayden vicous fan set up. My problem is when the pulley is fitted there isn't much room left to fit the clutch fan setup. Exactly how much of the waterpump shaft should...

I can't find a new Mopar Viscous Fan Package because they stopped making them so I bought a used one on ebay. The problem I have is one of the blades has a tiny kink along the one edge and I wanted to know if I straighten it (which I believe I can easily do) will it be okay or am I better to...

I am in the process of installing various gauges on my 65 Coronet and need some help. The Volt gauge instructions say to run a wire to a good engine ground, the pressure gauges and temp gauges say a good engine ground close to the sender. My question is can I run a heavy gauge ground wire from...

I was replacing my instrument cluster when I broke off one of the circuit board connectors (I think for the right side signals etc.) can this be fixed or should I order a new circuit board? Thanks for any information that can be offered.

I plan on upgrading the stock 318 radiator in my 65 Coronet with a stock looking and fitting copper/brass constructed high flow design. I would like to use a Mopar Performance viscous fan package and an electric fan set up on the front of the radiator. I have a 727 automatic tranny and a Hemi...

I am in the process of having a Hemi style hood scoop fabricated for my 65 Dodge Coronet and my choices are aluminum or steel - same price. I could use any advice on which way to go. The weight difference doesn't really make a difference to me but I plan on having the body dings and such fixed...

I want to buy and install a QA1 tubular K member for my 1965 Dodge Coronet. My problem is that they only list it on their website for 66 to 70 B bodies and I am not sure if that will work on my 65. Any facts on the subject would be greatly appreciated:icon_eyes: as my head is about to explode...