Search results for query: *

Hi everyone once again I had a couple questions after finding a leak in my heater core... well atleast its leaking from the delete plate (cover plate in picture) now my question is if it remove the cover for a visual inspection, do i need to put some type of sealant on the delete plate trim to...

Hi guys i got a 64 chrysler newport and i just noticed a leak under the hood right in front of the passanger side and driver side can anyone give me any advise on what it could be or help me in the direction. Thanks ahead of time PS driver side seems to leak alot more

I wwnt to reseal my transmission pan n upon removing it i noticed 1 bolt keeps spinning it wont get tight like its been stripped... how can i fix this issue... Thanks ahead of time

Hi guys i was checking all my fluid levels and noticed my brake fluid reservoir is low i was just wondering what type to put in it .. my car is a 64 chrysler newport.. thanks ahead for any help ..

Hi I have a question on upgrading bulbs all around the car brake lights, reverse lights, turn signals and head lights. I have a 1964 chrysler id like to upgrade all the bulbs to LED bulbs, i read somewhere that it will be fine everywhere except headlights? That it jeeds some type of resistor ...

Hi everyone Im looking treplacing my upper and lower control arms and as much of the front end suspension as I can find. Which so far it hasn't been so easy not sure if it's just this particular year or what... but it's for a 1964 chrysler newport if anyone can point me in the right direction...

So I bought my 65 chrysler newport some new wipers and I can't seem to figure out how to take the old ones off can someone let me know how this is done..

Where does this wire end at the firewall plug? I took some pictures ofnit... I'm not getting any voltage at the sender wire. . I'm wondering if I need to replace wire and how to go about that... do I replace it to that plug. I also saw another purple wire coming out same harness... Any thing...

Hi everyone I'm working with a 64 chrysler newport fuel guage never worked since I got her. Did my research figured fuel guage has voltage regilator inside it and commonly goes out there for temp and fuel guage don't read... I bought a dash on ebay and swapped out motherboard behind guages and...

Hi guys I was looking under the dash today, and I noticed this at the brake pedal ... is it my brake lights ? I also noticed a wire not connected to the other end and there just happens to be a wire hanging near it also does this wire go on at other end ? Also where would I be able to but the...

I just got 2 fuel system cleaners, was wondering if I can put one in my 64 chrysler newport without a problem. Thanks

Hi guys so I'm planning on keeping the origin look and mlj to g a new stereo under the dash in the center.... Do they sell kits for this ? Has anyone done it, that give me an example? Does anyone know the center speaker size and what's compatible? Is it easy to install? Do they make kick...

Hi guys like the topic says I'm replacing gasket to my transmission pan, I know those bolts are 150 inch pounds torque... so my questions are the filter what are the torque specs on that and I also have purchased a rubber gasket not cork... do I need to put anything on it to seal better ...

Can you test a fuel guage for a 64 chrysler newport outside of the dash by it self, since the voltage limitor is in the fuel gauge itself.

Hey guys my steering pump is leaking, and it looks like it's from the reservoir to pully area, I saw some gaskets i can get, and I found a video on YouTube on a guy doing that o ring swap but he didn't show any of it only the after its on... so I was wondering how easy is it to do ? Or should I...

Hi has anyone replaced the gasket on a 361 5.9l v8 ? I got a 64 chrysler newport and it's leaking some from the plan I decided to replace the gasket. Can anyone give me some helpful hints ? Should I use a glue ? Or some type of bonder besides the gasket and I got 35 foot pds torque on drain plug...

Hi everyone I got a 64 chrysler newport what is the oil capacity and the transmission oil capacity I plan on replacing gaskets as they leak a lot... I know to get type A for ATF+4 BUT HOW ABOUT OIL WEIGHTcan someone help me pick what oil I need thanks

I've looked for this information online. I haven't come across any good information I got a 64 chrysler newport and the front seats are beat up I been looking for some seat covers that fit, can anyone point me in the right direction or give me the size of the front seat... thanks ahead of time.

I got a question in regards to getting new ball joints installed.. is it fairly easy to get ? With the arm or support beam. Or do I need to basically get a whole new setup on my front end ?

So I parked her last week didn't turn her on for a week or so and bow when I went to turn her on she was completely dead and so I tried jumping her now she has power but won't turn over. . Any help thanks guys