Search results for query: *

This project started out as a modern Bullitt clone but quickly got off track. It has a 6.1 from a 06 SRT8 Charger and a 545RFE Auto trans from an 07 Ram. Rear gear is 3.23 sure grip. It looks pretty stock except for the Carbon fiber rump stripe and LED tail lights. Other upgrades are 15"...

Here are some pics I got from a friend in Australia. Not a B body but cool just the same. It is a 77 Charger Valiant the guy bought new and has now retrofitted it with the guts of a 300C. Looks like a factory install. I was impressed and thought I would share.

I have installed a 6.1 Hemi in my 68 Charger. The thing starts and runs fine except for an excessive charging problem. I have correct battery voltage everywhere I test in the key off and key on mode. I have 7 grounds on the vehicle that all test O-.3 ohms. The battery voltage is within .2...

Finally getting down to where the end is in sight. Looking for a little info on the start run issue. I'm sure I am not the 1st one with this problem but I fired it today for the first time. It started right away but will not stay running. Kinda like when the ballast resistor is bad in our...

The 6.1 I have has a single 3/8" nipple in the intake manifold for vacuum. I need a couple extra ports for the headlight vacuum and the heater a/c vacuum controls. I have been thinking of drilling out the factory nipple and tapping it for threaded multi port. I don't much care for the...

I have my 6.1 /545RFE mocked up and in my 68 Charger. Had to cut the TB Cross member out at the hump to make room and cut the floor out at the tunnel to make room for the transmission. I plan on re-using my Console & Floor shifter. I know I will have to raise it some from the stock area. I am...

I am still waiting for parts to do the mock up on my 6.1 swap into a 68 Charger so have time to wonder about a few things. Have any of you guys that have done these swaps incorporated Cruise control? I figured with Air and power windows, there is no reason why I shouldn't have cruise too.

Has anyone looked into swapping a 6.1 ro 5.7 into a b body using the new 68RFE 6 speed Auto?

I have some questions on making this install work. 1. I realize the tunnel needs a lot of attention to install either the NAG1 or the 545RFE. I am wondering if anyone has installed the NAG1 and was able to install the stock console over the refabbed hump? IF so, has anyone been able to...