Search results for query: *

As I am building my 71 Charger I have decided that I want to use a Holley single plan intake, mainly because it will allow me to run a Mopar oval air cleaner under my air grabber. The first issue I am encountering is that it does not seem that anyone makes an adapter for a Mopar throttle body...

As the title says, I have a G3 Hemi (5.7) and am going to be using a cold case radiator with a 1.5" upper and 1.75 lower nipples both on the passenger side, anyone have any recommendations for hoses? I have a Holley front mount so the nipples swivel.

I have and plan to use a DRW pedal from a 2015 Grand Cherokee (bought new from RA) in my 71 Charger. I made a mount (actually am redoing it now) but I realized I don't have an electrical connector for it, so question #1 is does anyone know where I can get the connector outside of a salvage yard...

I am in the process of swapping a 6.4 cam into my 19 crate 5.7, part of the swap is to change out the springs. I purchased the Mopar performance 5.7 springs and went to install them, the drivers side (left) was fine as it has 1mm (.040) shims however the right side has locater style seats which...

So what are you guys running for your G3 Hemi fuel lines, meaning what size? I am debating on whether to use 1/2" or 3/8". Normally I would just default to the larger size and be done with it but 1/2" steel fuel is a little more difficult to find over 3/8" which is pretty plentiful. I am sure I...

So I am currently pondering what air cleaner system/type I will use on my 5.7 going into my 71 Charger. I have a Mopar CAI on my 2010 Challenger RT which is ok but to be honest I'd rather not run something like that on the Charger. I am thinking of several options; 1. Running the inlet tube...

As the title says, I am interested in what everyone is using for engine mounts as well as how you like (or dislike) them, what if any mods you had to do, etc. I am putting a 5.7 crate engine and A833 into a 71 Charger and will be using PS (probably Borgeson), Headers (TTI) and a Hydroboost...

So I am looking at options to control my 5.7 crate engine (2016-2021) which is a VVT engine. I really wanted to use the Holley Terminator X Max system but they all say "non VVT". I know Mopar sells their system for the crate engine but I really want to be able to tune it and I am familiar with...

I am continuing my research for my 5.7 swap in my 71 Charger (already have a crate 5.7) and am looking at what I want to do for a throttle body and subsequent throttle pedal. My first thought is to use a modified TB that uses a cable, therefore I can use the stock pedal. However, I am looking...

I am doing some research for the 5.7 crate engine I bought to put into my 71 Charger and am currently looking at the accessories (alternator, PS pump, AC compressor). I see the Mopar sells some kits but I am wondering what you guys are using. I appreciate any advice, pictures and/or comments.

I ordered a crate 5.7 from JEGS which is now shipping to me. I intend to put this engine in my 71 Charger and run a A833 behind it (please don't tell me to run a Tremec, I already have the 4spd and intend to use it). The crate motor comes with a flywheel, clutch and PP. Anyway, I have some...

I just ordered a 5.7 crate motor which comes with a flywheel, clutch and PP. I am going to install this (eventually) into a 71 Charger and I am wondering what others are using for the throw out bearing set up, mechanical or hydraulic? I built a hydraulic system for my 73 Cuda and it works ok but...

I apologize if this has already been done but I have not seen anything like this. What I propose is a listing of information that members can look at to get some information about this swap. There are a lot of individual builds but it can get a little confusing if you are just looking for raw...