Search results for query: *

I have a big block 7 quart oil pan with pick-up and windage tray for sale! The pickup is the better "old" style" with the 1 piece pipe! I am selling it all for less than the cost of the pick-up and windage tray at $65.00 plus shipping! The gaskets in the picture have been sold! If your...

Up for sale is an NOS Mopar Performance intermediate oil pump shaft with bronze gear! This shaft is new and comes in it's original packaging. Mopar Performance makes two different shafts and this is the longer one. It is for the aftermarket oil pumps that take a longer shaft and need the softer...

I have a used set of COMP CAMS solid roller lifters for sale. The part number is 829-16. These are were replaced as a part of a routine engine freshen up. The price new for a set is over $600.00 and I am selling this used set for $150.00. Would be great for a budget build or spares at this...

I have an NOS in the package Mopar Performance oil drain plug kit. It is still sealed in it's original package and includes a vintage decal! The price is $15.00 plus shipping. If your interested start a private conversation and include your zip for a shipping quote. Thanks!

I have a pair of new Moroso solid motor mounts for sale. This is a spare pair I bought and never used. The Moroso part number is 62520. They fit 440 383 340 318 engines. They fit 1966 through 1972 B Bodies and 1970 through 1974 E Bodies. The price for the pair is $35.00 plus shipping. If your...

Here is what's up for sale: All parts from INDY CYLINDER HEAD Good HP rocker shafts set of 1.6 rocker arms spacers and hold down plates Only need to replace 1 left position rocker. I am selling it all for $175.00 plus shipping. I can deliver to the Indy swap meet with pre payment! If your...

I have a set of 10 Moroso 1/2-20 X 3" wheel studs for sale. They are part number 46190 and are the press in type with a .685 knurl. These are selling new at $25.00 for a set of 5. The price for the 10 is $15.00 plus shipping. Start a private conversation here with your zip if interested. Thanks...

I have for sale some new and never used fiberglass parts for 1970 Plymouth Road Runners and GTX's. First up is what I believe is a bolt on type trunk lid. It weighs 16lbs and has the mounting bolts for the latch striker in place. The price on the trunk lid is $150.00 Next up are 2 rear bumpers...

I am selling my left over Ratech parts from rebuilding 742 case MOPAR 8 3/4 center sections. Here is what is included: #1 Ratech part number 1107 pinion shims qty 4 .010 shims used, qty 1 .012 shim used and qty 1 .015 shim used. #2 Ratech part number 1108 pinion shims qty 3 .010 shims NEW, qty 1...

I have a pair of brand new Corteco big block Mopar head gaskets part number 55655HG for sale. They fit 383, 400, 413, 426W and 440 engines. They are a .038" thick compressed gasket. They are shown as a 4.42 bore which would be good for stock to .030 over bored engines. New in the original...

I am selling a used but very nice deep pan for a 904 transmission. This is off a later application that has a magnet in the pan to catch the fine metal particles flowing through the system. There is a filter extension, a set of pan bolts and some extra hardware for mounting shifter cables and...

I have a used 7 quart oil pan with the correct length pick up and windage tray for sale. The price for it all is $75.00 plus shipping. Start a private conversation with your zip if interested. Thanks!

I have an almost new MOPAR 904 transmission large 7290 joint slip yoke 26 spline. Back when I first started running a 904 behind my big block I bought this yoke. Not to long after that I had an aluminum driveshaft built with the 1350 size joints. The part number on this yoke is 52097955 and they...

I have a used SFI B&M flexplate part number 10231. It has a dual pattern for 5/16 and 7/16 bolts. This flexplate is for 10" convertors and is 10.84" in diameter. I am selling it for less than 1/2 of the cost of a new one. It is out of date for the NHRA but would be great for a HP street car! The...

I have a pair of Direct Connection race BB valve cover gaskets for sale. They are still sealed in the original packaging. The part number is P4452091. The price is $30.00 plus shipping. If interested start a conversation and include your zip. Thanks! John

I have a pair of rear hood pin brackets for the 1969 1/2 A12 cars with fiberglass lift off hoods. They were modified and had tabs added for a B Body fiberglass race hood. They bolt up to the factory hood hinge mounts with no drilling or fabrication! SOLD! Thanks Hossbee! Thanks! John

I have a very nice but used B&M 8 bolt crank flange type flex plate. The B&M part number is 10231 and works with 10" bolt pattern convertors. The overall diameter is 10.84" and has a dual pattern for 5/16 and 7/16 bolts. These go for $135.00 to $150.00 new and in date. This one has an expired...

More and more racers are going to the 904 transmissions. I have a like new TCI deep pan for the 904 part number 127900. This pan comes with the TCI allen head bolt set. There is also a filter extension included. These sell new for about $225.00 and this one is $125.00 plus shipping. Thanks! John

I have cut down 4 original K member mounting bolts for my drag car. Prior to installing them I got a deal on 4 Titanium bolts! These were cut down to fully engage the threads in the frame rail and no more. The price is $15.00 plus shipping. Thanks! John

I have a pair of used K & N 62-1170 valve cover breathers for sale. They have a 1" inlet tube and are 2" tall and 3" in diameter. Each one has a portion of the outer lip that was roughed up for a shield that has been removed. These were $25.00 each new and I'm selling the pair for $15.00 plus...