Search results for query: *

Two 489 Yukon after-market cases (one new one slightly used), both Moser 35 spline spools, new bearings & new 1350 u-bolt pinion yokes (companion), one with new Richmond 4.30 gearset, the other with slightly used 5.12 Richmond gear set, $850 for the 4.30, $800 for the 5.12, PLUS shipping from...

472 crate hemi built by Moran Racing of Taylor Michigan. If you're not familiar with Moran, they build big HP/high-dollar engines; this one is neither, just a 472/579 hp street engine. As-built, it was topped off with a Big 3 EFI set-up for E85 fuel. I recently removed that and installed a new...

New, in-the-box RM-6073 QuickTime bellhousing for Chrysler big block, using 130T flywheel and Chrysler 3 and 4spd transmissions. All parts included as from the factory, including blockplate, all fasteners and reducing rings $900 plus shipping. PM me here if interested, thanks.

Supposedly new 5.57 8-3/4 gear set for 489 case, brand unknown but it is stamped USA with the 'heart' stamping. I got these and a set of 5.38s 2 years ago installed with spools, but decided they're probably a bit too low for my current project. I removed them tonight and will replace them with a...

NOS alumiunm throttle bracket for 4 bbl carburetors, dual retrun springs w/adapter, never bolted on, $30 plus shipping from Savannah, Tn. PM me here if interested, thanks. As a side note, I forgot to mention the clamping bracket is probably for an after-market Locar-type cable, not the OEM type.

New in-the-box Edelbrock Performer intake manifold for the low deck 361-383-400 engines, still wrapped in plastic, $300 plus shipping from Savannah, Tn. PM me here if you have an interest, thanks!

New, in-the-box RM-6073 QuickTime bellhousing for Chrysler big block, using 130T flywheel. All parts included as from the factory, $950 shipped within the continental 48 states. PM me here if interested, thanks.

Unknown 8" converter for '67-later 727, possibly A-1. New hub installed by Spec-Rite converters of Redding Calif; they stated it's a decent converter and should flash approx 4800-5000rpm behind a 440-type bracket engine. Comes with out-of-date SFI flaxplate and bolts, $500 plus shipping from the...

Very nice MP M-1 intake manifold with very little use, $300 plus shipping from the Savannah, Tn area. PM me here if interested and thanks for viewing...wb

New in-the-box Edelbrock AVS2 800 cfm carburetor with new unopened strip/jetting kit, $380 plus shipping from the Savannah, Tn area. PM me here if interested and thanks for viewing...wb

Moroso dragster/FC pan, baffled, set-up for -20an inlet, trap door, mounted but never used, excellent pan for tube chassis car or highly modified k-member, $750 plus shipping from the Savannah, Tn area. Questions or more pics? PM me here, thanks for viewing and thanks for the ad space, Joey...

One more time, 472 crate hemi built by Moran Racing of Taylor Michigan. If you're not familiar with Moran, they build big HP/high-dollar engines; this one is neither, just a 472/579 hp street engine. As-built, it was topped off with a Big 3 EFI set-up for E85 fuel. I recently removed that and...

I've had this pachyderm hanging around my place for a few years; fresh build by Moran Racing of Taylor, Mich 6 years ago. I bought it for a '64 Belvedere street project I was building for a Barrett-Jackson auction before I moved to Tennessee, however we all know how life sometimes dictates our...

I have 1 new pair of Schoenfeld slip-on 3-1/2"x16" collectors for 1-7/8" primary headers. They'll need the tabs welded on when you align them with your primary tubes. $125 plus shipping, from Savannah, Tn 38372. PM me here if you have an interest and thanks for viewing my ad...wb

I have a mild steel b-body Alston 10 pt cage that's been hanging around for several years and would like a new home, especially if somebody uses it! $300 plus shipping or come and get it in the Savannah, Tn area. PM me here for more info, thanks...

Big 3 EFI, Indy manifold and valley plate, Bosch E85 injectors, MSD disdtributor and wires, Big 3 ECU and wiring harness w/paperwork and throttle body, used for one dyno session only $2500 plus shipping from the Savannah, Tn area. PM me here for info and specifics, thanks...wb

I've had this pachyderm hanging around my place for a few years; fresh build by Moran Racing of Taylor, Mich 6 years ago. I bought it for a '64 Belvedere street project I was building for a Barrett-Jackson auction before I moved to Tennessee, however we all know how life sometimes dictates our...

New Spicer brand 1350 slip yoke for Chrysler 727/833 transmissions, $80 plus shipping. PM me here if interested and thanks for viewing my ad...wb

Used Dana 60 parts (except as noted), all in very good condition, some with little use... Gearsets... 3.73 street gears (8620), $120 plus shipping 29 spline 4.10 street gears (8620), $110 " 29 spline 4.56 street gears (8620), $125 " 29 spline 4.88 street gears...

8" 727 race converter (possibly an A-1), freshened by SpecRite converters of Redding Calif. Approx 4800 flash behind a moderately-built 440, comes with an out-of-date SFI flexplate and grade 8 bolts, $500 plus shipping from the Savannah, Tn area. PM me here if interested and thanks for viewing...