Search results for query: *

Used set of Dougs headers for an RB Mopar. Part number D452, ceramic coated. You can check application on Summit or Jegs site. Some scrapes, some dents not affecting performance; They are USED, not new. Including a new set of #6019 Remflex header gaskets and #8003 Remflex collector gaskets. The...

USED LAKEWOOD BELLHOUSING (#15335) with blockplate, starter nose cone, throwout fork pivot and bolts. Stripped and painted. Clears TTI and Dougs headers. Was used as is with a 130 tooth flywheel. $600. plus shipping from Lincoln, CA.

USED Hurst shifter knob with 12 volt Line-Lok / Nitrous Button, as pictured. $50.00 plus shipping from Lincoln, CA.

USED Centerforce SFI rated billet aluminum flywheel. 130 tooth, 12.2lbs. Works well with low gears. Came out of my 1963 Plymouth when I installed a TKX 5 speed. $150.00 plus shipping from Lincoln, CA

Used Innovate MTX-L air/fuel gauge kit. Please see pictures. Interchangeable black or white face, 8' sensor cable. Very good condition. $90.00 firm plus shipping.

I have two 1" high aluminum air cleaner spacers with 'o' rings for sale. Excellent condition. $15.00 plus shipping for the pair. Will fit Edelbrock, Carter, Holley, etc. with 5.125" necks.

I have two 1" high plastic carburetor heat spacers for sale. Very good condition with mounting studs, nuts and washers. $20.00 for the pair plus shipping. Will fit all square bore 4 barrel carburetors.

Slightly used 6903 Carter fuel pump purchased from Mancini Racing last year. Maybe 3,000 miles on it. I've gone to EFI with an in-tank pump so I have no use for it. Very good condition. $40.00 plus shipping.

A slightly used pair of Schumacher Poly-Loc motor mounts for a 1962-1965 B body, small or big block. All threads are good. Here's the tech info: http://engine-swaps.com/Pages/ProductsType/PolyLoc.html $100.00 firm plus shipping.

A slightly used ( less than 1,000 miles) Milodon #30930 7 quart oil pan. Fits various A, B and E bodies with B, RB big blocks or Hemi. I small ding, not affecting use. Includes Milodon #18325 3/8" pick-up. Pick-up wont fit hemi Includes a new FelPro pan gasket. Purchased from Summit, the cost...

I'm selling a collection of used -6AN fittings and hose sections. Most are Summit, Earls or Russell brand. Mostly black but some blue/red. 2- -8AN bulkhead fittings. Pictures show most, but I've added a few other fittings. New, these would all retail for $337.00. I want $125.00 plus shipping. PM...

I'm selling a collection of used -6AN fittings and hose sections. Most are Summit, Earls or Russell brand. Mostly black but some blue/red. 2- -8AN bulkhead fittings. Pictures show most, but I've added a few other fittings. New, these would all retail for $337.00. I want $125.00 plus shipping. PM...

Used FiTech Fuel Command Center (FCC). Perfect working order. Includes mounts, push-lok fittings, installation manual and 25' of 5/16" vent hose. Does NOT include push-lok hose, which is available from Summit, Jegs or Pace. Most installations will need less than 6' of this hose. The reason I'm...

Selling the following as a set: 11" Spal pusher fan 962 CFM 10" Spal pusher fan 749 CFM CenTech adjustable fan controller with sending unit (1/8" NPT) and installation booklet. I used these to supplement my mechanical fan on days when the temperature got over 100*. Very good condition with only...

17" wide blade stainless steel flex fan. Flex-a-lite #1307. Steel hub, red center. Good condition. Moves a lot of air... $25.00 plus shipping

Selling a pair of Mopar Performance wrinkle black valve covers for a big block. Excellent condition with only 25-30 miles on them. Including bolts, washers, PCV valve, grommet, baffle and a Mopar chrome breather cap. All you need to do is add gaskets and bolt them on. I had these on a 426 with a...

Used CPPA (TTI before they were TTI) HEADERS for a big block wedge. Fits - 62-74 B body - 383 through 440 67-76 A body - 383 through 440 These are 14 or 16 gauge heavy wall 2" tubes with 3.5" collectors and 3/8" thick flanges. Although they're used, they're not abused. Slight dents for...

As new set of valve covers. Blue stripe Fel-Pro gaskets copper-coated to covers. These were set on my motor but were never run. PCV 1" knock-out plugged with a freeze plug. Only marks on covers are shown in photos. $125.00 shipped in CONUS.

This is an Innovate Motorsports #3891 DLG-1 wide band air/fuel gauge that gives readings for both banks. Purchased November 2015. Works perfectly. Here is the info from Summit's site: https://www.summitracing.com/parts/inn-3891 Complete and ready to install. PM with any questions. $335.00...

I am selling a pair of ViKing double adjustable smooth body rear shocks with less than 100 miles on them. These were purchased for a 1963 Plymouth Fury but will fit almost all B bodies from 1957-1977.You can go to www.Vi-King.com to read all about their shocks. Here are the specs: Part # B317AJ...