• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. A

    727 Dolly

    I got tired of kicking the spare transmission around so I built a little tricycle dolly for it using bent sheet metal and 5 inch casters. Now the transmission rolls around the shop nice an easy.
  3. A

    Working in the shop

    My buddy brought his GTX over last weekend for some work so we had a couple of B body cars and the Duster in the shop at the same time. Always fun to spend a weekend wrenching on the old Mopars.
  4. A

    Pinion yoke puller

    Here is my home made pinion yoke puller tool
  5. A

    Drivetrain alignment tool

    Fairly simple tools but sure makes it easy to see if the drive train is properly aligned. I have a setup plate on the front of a bare block and then a bushing in the rear of the transmission housing. That lets me slide a long piece of roll bar tubing thru the main line to see if the engine is...
  6. A

    Cradle for Dana 60 rearend

    I put this cradle together so I could safely install and remove the Dana 60 from my car. I tried to do it with a floor jack but it was just too unstable. With this cradle bolted to my trans jack the rearend is very stable and I can control the placement into the car.
  8. A

    Transmission tools

    I built an adapter to hang a 727 transmission from my engine stand. This lets me rotate it around for easy assembly and disassembly. I also made a bracket that lets me pick up the transmission and move it around the shop with the crane.
Back
Top