Search results for query: *

A set I replaced in my 67 GTX. The one from the pass side is basically as-new. The driver side one has an indent from a garage door opener (not mine) and a small cut near the front edge. The indent on the top of the driver side is not as pronounced and possibly swapping them from side to side...

Set of reproduction kick panels dyed in Metallic Red from Legendary interiors. Received these with a large interior order from Legendary and didn’t take a close look at them until many months later. I decided not to use them as the grain pattern is not well reproduced. It’s a much coarser...

This is the lower weatherstrip that goes around the door. The previous owner put too many shims behind the latch receiver on my left door and after I rebuilt hinges and remounted it and squared up the gaps, the edge of the rubber got caught in the latch and mangled up. I had to remove some...

Two used interior door latch pulls. The usual small pitting but better than many and still have good shine. If someone wanted to, they are excellent cores for re-plating, but reproductions are as cheap as $35 and up now. $5 plus shipping. Please reply by PM.

I pulled these out of a car in a salvage yard years ago because except for the weathered coloring, they seemed in good shape to be re-dyed, particularly if someone has a light copper interior. The ash trays are rusted. $10 plus shipping Please respond by PM If interested.

4 used, original cranks - all knobs are tight. Chrome shows some age. 2 new cranks. I think these were some repro ones I bought years ago and didn’t use. The knobs are like the 67 pattern but are slightly different from the originals. $15 for all plus shiping. Please respond by PM.

Cleaning out used parts. a set of OER repro window cranks and set of used, fair to good condition window cranks. All knobs are tight. These are all the long cranks for the front. $15 + shipping. Also one set of used, short rear cranks in fair to good condition. All knobs tight. $10 +...

Cleaning out used parts. A used set of bases. One side has wear but bottom side is OK along with ends so could be flipped. $10 + shipping.

A set of used arm rest bases. Top side a bit worn but bottom side and ends still pretty good so they could be flipped. $10 + shipping

Rear defroster blower fan. Fan motor works fine. No other parts. $30 + shipping

Copper color interior, rear arm rests. Solid condition but need to be re-dyed and ash trays replaced. $20

2 66/67 Plymouth radio block off plates. Both good cond. One (red) has back strap and nuts. Red one $40. Blue one $35 + shipping. Both together for $70 + shipping.

A complete 66 - 68 console plate set for 4-speed and console tach. Driver quality that needs polishing and paint detail. Some scattered pitting. No broken studs on door. Includes hinge but no fasteners or catch plate at the console front. The shift boot is torn. Far from new but with a...

One black, used pass side 13” armrest from pass side of car - very nice. unfortunately, as typical, the driver side was very worn and not really worth reusing. But in the slight chance someone were to needs a nice right side one, here it is. Otherwise into the trash. $10 + shipping