Search results for query: *

New in box and on card. Gen III Hemi Windage Tray and Pan Bolts. Paid $107.90 for the pair. Asking $60 plus delivery.

5.7 Hemi Long Block approx 2006. Non VVT. Non MDS. Rebuilt and used for mock up until permanent engine was installed. 6.1 Cam with aftermarket Push-Rods to control Hemi "Tick". Approx 1 hour of run time, good oil pressure, good engine temp. No Valve covers No Oil Pan No Timing Cover No Intake No...

These are Custom End Mills made to create the Sway Bar Stray Dies that I sold for the past 5 years. I paid $250 to have them made and they were used once. $65.

Reproduction Air Cleaner. Metal. New. $375 plus shipping

These are off of my 69 RR 383. They were blasted, painted and then baked with Eastwoods Manifold Paint when installed on my car. The Heat Riser was also rebuilt from an old kit at that time and also painted and baked over 6 years ago. Used for a short time. Excellent condition. I would true the...

Limited Repop run of 66-69 B-Body Sway Bar Mount Straps. These were the victim of 50 years worth of curb grinds and not serviced by Mopar. Made by Americans in America from correct gauge metal, width and contour from dies on punch presses. Shipping included via USPS in mainland US. Sold in pairs...

Reproduction Underhood Plate for 1967 RO23/WO23. This plate would mount to the underneath of the hood to help funnel and seal air coming in from the hood scoop into the air box that mounts to the carburetors on the Super Stock cars. This is a brand new reproduction part and is an exact copy of...

Limited Repop run of 66-69 B-Body Sway Bar Mount Straps. These were the victim of 40 years worth of curb grinds and not serviced by Mopar. Made by Americans in America from correct gauge metal, width and contour from dies on punch presses. Shipping included via USPS in mainland US. Sold in pairs...

Reproduction Underhood Plate for 1967 RO23/WO23. This plate would mount to the underneath of the hood to help funnel and seal air coming in from the hood scoop into the air box that mounts to the carburetors on the Super Stock cars. This is a brand new reproduction part and is an exact copy of...

66-69 B-Body Sway Bar Mount Straps. These were the victim of 40 years worth of curb grinds and not serviced by Mopar. Made by Americans in America from correct gauge metal, width and contour from dies on punch presses. Shipping included via USPS in mainland US. $44

Limited Repop run of 66-69 B-Body Sway Bar Mount Straps. These were the victim of 40 years worth of curb grinds and not serviced by Mopar. Made by Americans in America from correct gauge metal, width and contour. Shipping included via USPS in mainland US. Sold in pairs for $44, just trim and...

Limited Repop run of 66-69 B-Body Sway Bar Mount Straps. These were the victim of 40 years worth of curb grinds and not serviced by Mopar. Made by Americans in America from correct gauge metal, width and contour from dies on punch presses. Shipping included via USPS in mainland US. Sold in pairs...

Used gears, case or no case.