Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Up for grabs is a 68-70 B body tti exhaust system I bought a while back for a project that did not come to fruition. It's a header back, 2 1/2" X pipe system , new in the box - only opened up for the pictures. Part# XB25HW6870 $625 located in 19464
Up for grabs is a 68-70 B body tti exhaust system I bought a while back for a project that did not come to fruition. It's a header back, 2 1/2" X pipe system , new in the box - only opened up for the pictures. Part# XB25HW6870 $625 located in 19464
This is 1968 440 HP2 block that has been cooked, magged, square decked, had 3 sleeves installed and rough bored .030 over. There is a small amount of flash rust from storage, but not in the bores. The vin # is 8G166970 which would indicate a St Louis built car ( GTX, Coronet R/T or Charger...
Up for grabs is a tti exhaust system I bought a while back for a project that did not come to fruition. It's a header back, 2 1/2" X pipe system , new in the box - only opened up for the pictures. Part# XB25HW6870 $625 located in 19464...
Here we have a 69/70 Chrysler 8.75 rear differential with a 489 case, housing a 3.23 Sure Grip unit. 7290 U joint and 11" drums - complete. Drum to drum is 60.25" Spring perches are 44" $850 Located in 18041
Up for your consideration is a Centerforce II pressure plate for an 11" clutch. This was mounted on an engine in a test stand for mock up, but never run in a car.
http://www.centerforce.com/products/product-detail/id/CTF-CFT361800/name/centerforce-ii-clutch-pressure-plate
$175 plus the ride.