Search results for query: *

1969 gtx 440 hp block. Has gtx full vin. Complete short block. 030 over and spins freely. $1200 1970 440 hp2 block. Bare block and caps. $1000 1971 440 standard bore. Disassembled $700 1971 383 hp Disassembled standard bore. $500 1969 440.030 over. Partially tore down. Bad piston. $700 1971 440...

Original 1970 mopar magnum manifolds. Correct for 383, 440, and 440+6 . This is a pretty nice original set. These are from a dry climate so don't have a lot of pitting like most. Flanges at heads and exhaust pipes are nice original surfaces. There are no broken ears or cracks. The right manifold...

1971 440 over the counter block that carries no vin or pad stampings. This is a big rod hp/ 6 pack engine. Engine appears to be a fresh rebuild with very little run time on it. I looked in cylinders with bore scope and it appears to have 1971 standard dished pistons. Engine is very clean inside...

1970 440 hp block. This is a big rod engine. Crank and 7 rods can be included if buyer wants. #1 rod journal was chewed up but might be saveable. Rod was junk but the other 7 are good. No balancer. Engine is standard bore. Has been magnafluxed and hot tanked. Located in Wyoming. Possible...

498 case (1962) 2.93 clutch type suregrip. I believe this is about the same as a 741 case. $350 741 case 3.23 clutch type suregrip. $450 741 case 3.23 clutch type suregrip. $450 742 case 3.23 clutch type suregrip. Has some issues. $400 489 case 3.55 with clutch type suregrip. Works good but...

Early 1972 400 block with the extra main bearing thickness. This is for the block and main caps. This has recently been hot tanked and magnafluxed. Everything checked out fine. Engine will need bored out to clean up cylinders. It is currently standard bore. This is located in Wyoming...

1970 440 hp block. Block and main caps only. Freshly hot tanked and magna fluxed. Everything checked out fine. Has one small nick in the bottom of #1 cylinder but machine shop says it won't affect anything. Block will need bored out. Not sure what it will clean up at. Block numbers are...

Early casting 1972 400 block with the 230 casting. This block has the heavy main bearing webbing. This is a 9/3/71 casting. Bare block with main caps. Block is in good shape and has no apparent cracks. I am going to take the block to a machine shop and have it cleaned and magma fluxed. If...

Good used balancer off of a big rod 440 h.p/ 6 pack engine. Balancer is in good shape. I forgot to get pictures but will post later or upon request. Located in Wyoming. Will ship at your expense. Asking $250

Factory iron 4bbl. intake manifolds for Mopar 318 Poly head engine. Hard to find. Will not interchange with the LA series small block Mopars. Both are in good condition, but were slightly modified to accept larger/different carburetor than original. Located in Burlington WY. 82411 Asking...