Search results for query: *

Was told this came out of a '68 Charger. Have read that this specific font was in '69 though. In both cases, rare to find. The threads are in excellent shape and the mechanism also appears to be in great shape. This would make for a really nice candidate to fully restore or simply disassemble...

OEM 7219 Handle - sent out and just got back today from Chrome It! based out of Marietta, GA. Triple plated as well as OE screws and OE lower bezel, freshly polished. The upper bezel and shift pattern lens(factory style pattern) are from Brewers. Every part of the factory Hurst shifter box was...

Decided not to restore these ones and let someone else figure out the cost of doing so. Has the original overcenter spring with QC marking which can be saved if you soak it in fresh evaporust, it'll only take the rust off. Will also work in 70's and probably 66-67 b bodies although it's correct...

Blasted, primed, painted to look like factory Correct for 68-69 b bodies but will also work in 70's New overcenter spring, spring pin, and pedal pads Includes dash support rods, upper bracket, and brake pedal m/c rod bolt/nut $600 + shipping from 31750 PayPal F&F or money order/check Thanks FBBO

Nice set that will clean up pretty good. Out of a 69 Coronet. $200 + shipping from 31750 PayPal F&F or money order/check Thanks FBBO

OEM part $50 + shipping from 31750 PayPal F&F or money order/check Thanks FBBO

$50 + shipping from 31750 PayPal F&F or money order/check Thanks FBBO

Correct for 68-69 due to no extra hole in clutch pedal for safety mechanism. Parts were bead blasted, primed with self etching primer only up to where the paint stops, with 2 coats of satin black with the overspray to mimic factory appearance. All the bare metal were coated with RPM to prevent...

They may be the same for 66-67's too, not sure. The pad is still nice and pliable. Also the main shaft with nut to attach it. The nylon bushings look good although one is worn on the outer edge in a little spot and could use cleaning. $20 + shipping from 31750 PayPal F&F or money order/check...

Came out of a '69 GTX 2822 273 crank arm and bushing for 3 speed motors Bead blasted and coated all steel pieces with RPM Cleaned up plastic pieces and clips Nothing broken Comes with a new DMT seal kit $300 shipped in the US from 31750 PayPal F&F or money order *Engaging salesman pitch* "Hey...

Came out of a '69 GTX 2822 273 crank arm and bushing for 3 speed motors Bead blasted and coated all steel pieces with RPM Cleaned up plastic pieces and clips Nothing broken Comes with a new DMT seal kit $350 + shipping from 31750 PayPal F&F or money order Thanks FBBO

Came out of a '69 GTX 2822 273 crank arm for 3 speed motors Bead blasted and coated all steel pieces with RPM Cleaned up plastic pieces and clips Nothing broken Comes with a new DMT seal kit $350 + shipping from 31750 PayPal F&F or money order Thanks FBBO

Everything looks to be original. Non console handle. Mechanism moves nicely with no slop, just needs to be taken apart and cleaned good with fresh grease added. Brewers will send you a restored one with this core for $200. Handle has scratches, could be rechromed for show. Called a guy here in...

These were removed from a '68 Charger. Has the 2 speed bushing and crank arm. Bead blasted and coated in RPM, all original bushings/plastic clips with nothing broken, and comes with a new gasket kit from DMT. Part #'s pictured. $275 + shipping from 31750 PayPal add 4% or money order is fine. 3...

OEM. Someone put a little groove near the bolt hole with a torch probably removing a rusty bolt back in the day. I filled it in with weld and ground smooth. Got most of the surface rust off best I could with a wire wheel. Original factory undercoating is what's on there currently. Threads look...

This booster came with my pedal assembly when I bought it, not sure of application. Will most definitely need a rebuild. The tag says Plymouth 1968 - B, C - 4213 - H, so maybe off a RR or GTX? Patents are U.S. 3.013.533 and U.S. 3.013.537 Couldn't find any other markings on the booster The pivot...

OEM American steel push rod. This one attaches to the clutch pedal and z bar. Acquired a 68-70 clutch pedal assembly that came out of a Coronet and already bought a push rod from another member so this one's up for sale. Evaporusted and cleaned it up pretty good, someone can take it from there...

Auto brake pedal assembly Disassembled, cleaned, and self-etch primed ready for paint Just pulled the brake pedal and shaft out of evaporust today so those are clean and ready Black support rods/pieces were primed and painted in gloss black $80 + shipping from 31750 Paypal Friends and Family...

Will definitely need a rebuild Not sure the worth, just figured I'd throw it out there in case anyone's interested Stamping #'s are 6768 29881 G(maybe?)7 - can't make out what's beside the 7 The rubber piece doesn't appear to have any rips or tears with "Made in USA" (hardly see that anymore)...

Some surface rust on the outside Gives someone the opportunity to blast and paint to your liking Chrome don't get you home as they say Insides are pretty nice $40 + shipping from 31750 Paypal F&F preferred Thanks, FBBO