Search results for query: *

Reconditioned and ready to install. Some minor scratches from getting moved around during storage. According to Brewers this can also be used for 70 four speed if you have the proper tailshaft housing. Includes the transmission mount. Asking $60 plus the ride. Parts ship from the Toledo...

I purchased this for my project but went another direction to get full exhaust out the back. The tank has never been installed. Comes with the 66-67 strap and j-bolt from my car as well as my original sending unit. The sending unit functioned when it came out, but no promises now....I...

Attached is an assortment of window parts from a 68 satellite. They aren't the prettiest parts in the world but if you have nothing these are reasonably priced. The one rail has the stud snapped off. The window seals have a little maroon paint and the drivers side is very slightly messed up...

I believe this to be an OE handle and mechanism. I acquired this in a transmission purchase years ago and had intended to use it in my project, but ended up going with a pistol grip setup instead. I disassembled, cleaned and lubricated it and had it mounted on the transmission on an engine...

These are the originals off my 67 Belvedere....can't use them since I went with the minitub. The car was an original southern car with very little rust, so these are in great condition. They have been bead blasted and hit with rustoleum satin black. Comes with all the hardware seen. Let me...

I have a pair of shock plates that came off my 67 belvedere that are in great condition. The car was a southern car so rust was minimal to start with. There was some slight pitting where the spring and the plate were in contact, but otherwise really clean. They have been bead blasted and...

I have a pair of rear 3/4" offset shackles that were used for a mock up but never run on the car. Both have a very small ding where they look like they swung around and touched the spring during moving the unit around, but otherwise in very nice condition. Comes with half the bushings (I used...

I'll state this up front....the shifter is rough...may not even be a rechrome candidate. Up for sale is a 70 non console b body pistol grip shifter. Original push in style handle. $200 plus shipping. For an extra $10 I'll throw in a set of reproduction handles. The shifter will need...

Complete rebuilt 69 Dana 60. $1,750 will not ship.....pick up in Toledo, Ohio area....if close could meet part way. I've done all the work, so I know for sure what has been done which includes. 3:54 sure grip with new clutch packs New carrier and pinion bearings New green axle...

I just pulled the entire front suspension from my 67 belvedere and am only planning to reuse the K frame and upper control arms. Everything else in the picture is up for grabs. Also up for grabs is the power brake booster, master cylinder and firewall reinforcement bracket...

Used but in very good condition. No broken bosses or studs. $80 plus the ride from Toledo, Ohio area. PM if interested or if you want to see additional photos. Thanks.

[Sold....thanks FBBO] Used needle bearing roller rockers with shafts and spacers. No hold downs. 1.5 ratio. I got these with a head and intake deal and don't need them. I know very little about these, but I think they are 440 source. The good....they're cheap...$50 plus shipping...

Overdrive A833 4 speed aluminum housing transmission with shifter. I think this came out of a truck due to the shifter placement. $125 Located in Toledo, Ohio area.

For sale a matched set of manifolds off a 68 big block. These are the manifolds used on the 440's and 383 road runner/super bee engines. Casting numbers are: 3843992 Left Side - date 2/29/68 (leap year) 3806900 Right Side - date 1088 (108th day of 68) The flapper is free but missing...