Search results for query: *

This was a NOS transmission that now has less than 10K miles on it. It works great, smooth shifting, no weird noises, etc. Please note that it has a FLANGE style output for the 64-65 B Bodies and a 23 spline input shaft. The price is $1200. picked up in Lincoln, CA, about 30 miles northeast of...

Early transmission crossmember from my 1963 Fury with a later 4 speed. Clean, ready to go. $99.00 plus shipping.

This was a NOS transmission that now has less than 10K miles on it. It works great, smooth shifting, no weird noises, etc. I pulled it to put in a 5 speed for the .68 overdrive so that I can keep my 3:91 rear gear and still keep up with traffic on the freeway. Please note that it has a FLANGE...

Modified driveshaft from my 1963 Plymouth Fury with a 1964-65 A833 transmission and 8 3/4" rearend. Might fit 62-65 cars utilizing the Ball & Trunion set-up. Wouldn't work with my new 5 speed. $350.00 plus shipping or pick-up in Lincoln, CA.

American Powertrain hydraulic throw-out bearing assembly for an A833 4 speed. Missing hydraulic hose and master cylinder. Was in my car before I changed to a 5 speed. Unfortunately, they are not interchangeable...I do have the manual. $110.00 plus shipping from Lincoln, CA.

Transmission crossmember from my 1963 Plymouth Fury big block with later 4 speed. Good condition, no rust. Should fit 62-65 M/T and A/T $119.00 plus shipping. Lincoln, CA

A833 4 speed transmission. Flange style output. Was new, old stock. Now with under 10K miles. 2.66 1st gear, 23 spline input, 4.354" front bearing retainer. Was removed from my 1963 Fury when I installed a Tremec TKX 5 speed. Transmission is in very good condition, shifts smoothly through all...

NEW Mopar #P4120272 kit as shown: 2 grommets, oil fill cap and chrome push in breather. Excellent condition. PM with questions. $30.00 shipped in Conus.

Time for a change. Basically selling my factory max wedge heads, crossram and associated parts to turn your plain Jane 413, 426 or 440 into a Super Stock clone. The lot price includes the following, ready to run: 1) #2402286 Max Wedge ported heads. Fresh valve job and Viton seals. 2) Used set of...

NEW Mopar #P4120272 kit as shown: 2 grommets, oil fill cap and chrome push in breather. Excellent condition. PM with questions. $30.00 shipped in Conus.

Milodon 4 quart oil pan (#30760) and pick-up (18660). Pretty much a stock replacement for a lot of cars. 3/8" thread on pick-up. Excellent condition; only about 6 months old. It's been blasted, primed and painted hemi orange. Google the part numbers on Summit Racing to check application. No...

Selling a gently used Griffin Aluminum fan shroud with 2 - Maradyne 12" electric curved blade fans. Fits 26" aluminum radiators or can be adapted to others. Please check the dimensions against your radiator and PM me if you have questions. I will also include a harness with relay and...

As pictured, two Spal 11" fans which have about an hours running time. Very good condition. $80.00 plus shipping for the pair. 30100364 11" Low Profile Fan - #VA09-AP8/C-27A-12V Straight Blade - Pull Height: 12.20" Depth: 2.05" Width: 11.57" CFM: 808 Amps: 7.5 Amps

Stock Mopar big block fuel pump push-rod. Within specs for length. $10.00 plus cheap shipping.

A brand new 6 quart big block oil pan. POWDER COATED orange. Won't fit my chassis. My loss is your gain. Purchased from Summit. Here's their application info: https://www.summitracing.com/parts/sum-g3511/applications A couple of tiny marks from trying to install. Pan was $95.00. Local powder...

Mancini 22" radiator and shroud purchased to fit a 1963 Plymouth Fury. Very good used condition with minor fin tweaks (please see pictures). Polished aluminum top tank. Two 1" rows of cooling tubes. Worked well to cool a street/strip big block with A/C at temperatures over 90*. Radiator and...

Big block 5 QUART (six with filter) oil pan with PICK-UP and magnetic drain plug. Excellent condition. No dents, dings, rust or scrapes. This was on my 63 Fury with a 440, after slightly notching the K member on the right side. 971 stamped in pan. Should fit a lot of different chassis. Will...

Powder-coated orange 4 bolt big block valve covers. Used/modified. Come with an open breather on one side and a PCV set-up on the other. Includes studs and nuts to install. Please see pictures. Holes in baffles were drilled to clear roller rockers. Nicked the inside with the hole saw. Didn't...

Mini Starter. Very good condition. Just removed from my 440 and was working fine. $50.00 plus shipping.

This is an Innovate Motorsports #3891 DLG-1 wide band air/fuel gauge that gives readings for both banks. Purchased November 2015. Works perfectly. Here is the info from Summit's site:https://www.summitracing.com/parts/inn-3891 Complete and ready to install. PM with any questions. $335.00 shipped...