Search results for query: *

Selling a set of (16) vintage Racer Brown valve springs. These have been sitting in the shop for decades! Someone wrote ”Hemi springs” on the box years ago but honestly I have no idea what these are……I will post some specs below using a dial caliper. $40 plus shipping. first off, these are an...

If anyone sees anything they like, just send me a PM. If your looking for a shipping cost, please do your own research first, I will use USPS and charge actual shipping from 14304 NY. 1968-1970 B body speedometer (redone by redline years ago) $100 66-70 chrome convertible corners, has some...

Selling a 68 2 bbl air cleaner. $150 pics below. Located in Niagara Falls NY. Someone may have trimmed the end of the snorkel. Or is that how they came? See pic. no comments in ads, send PM if interested.

All parts are for a 66-70 AC car..... Blower Motor and wheel (squirrel cage) with bracket and NOS spring clip nice! $125 Squirrel cage, blower wheel $45 with new NOS spring clip to hold it on your motor New Vent tube for blower motor $25 Copper Pipes for heater hoses and the H Valve in heater...

I have a 1967 C body 26” radiator that was in my 67 GTX last summer. I bought a new Glen-Ray with correct numbers for my car. This core has seen better days, dents and dings but did not leak on me. This was in the car when I bought it. Looks like a fan scraped it at one point, $200 not really...

I have a set of (16) hardened steel lash caps that were purchased from Mopar years ago for a project. Just found them cleaning my basement. I don’t think I will ever use these on any more projects. Here are the approx measurements: O.D. .495 I.D. 11/32 stem Height .146 Thickness .070...

1967 Dana 60, 3.54 gears, 602829 B.O.M. all new gaskets, seals, carrier and pinion bearings, 1350 pinion yoke, brake lines, tee and vent, most parts purchased from Dr. diff. New 11x2.5” brakes with original drums. Assembled, painted and ready to install. Factory original gears setup...

I am selling (3) sets of STICK ON Mopar red battery caps. New in the wrapper! They have a 3M adhesive backing on them. See Pictures .....I prefer to sell them all as (1) lot to one buyer. No battery stickers included. One sale FIRST $40 plus $5 to ship in the 48 states. I purchased these from...

I have a 1967 C body 383 Radiator / a.c. Has trans cooler. Online also states it's for high altitude application. What ever that means? I also have the 6 bolt shroud that Is a repop. This was in my 67 GTX, I just bought a new Glen-Ray with correct numbers for my car. This core has seen better...

Cleaning the shelf today, I have a few 68-70 B-Body AC heater boxes that I’m selling complete or as parts, let me know what you need, only the outer shell and some internals are shown in pics but ask and I’ll see what I have for you. Selling everything else in the picture below for $350 , may...

I have a 1967 Dana that’s been restored for my GTX but since my car is not real 4-speed I decided to build another Dana and save this one for the “numbers guy” that needs one. It’s a BOM 602829. Very hard to find. It’s drum to drum. Has 1350 yoke, 11x2.5” brakes, Powr-lok 3.54, date codes inside...

No replies in my ad, please send PM only. Dana 60 Ring Gear Spacer and all mounting bolts. For use when installing 4 series gears (4.56, 4.88, 5.13, 5.38...) on a 3 series carrier (3.54. 3.73, 4.11. $50 Dana 60 open carrier $100 30 spline Dana 60 trac lok carrier $200 30 spline Dana 60 ring...

Dana 60 Ring Gear Spacer and all mounting bolts. For use when installing 4 series gears (4.56, 4.88, 5.13, 5.38...) on a 3 series carrier (3.54. 3.73, 4.11. $50

Edit: Gears only, not whole axle.... Is anyone wanting a low milage and nice looking set of factory 4.10 gears for a Dana 60? I’m looking for the same in a 3.54 gear and will trade. Located in Niagara Falls NY. Thanks.

These are some left over parts from my 1967 power lok Dana 60 build. Selling all as a package deal. Will not separate. $100 plus shipping. I have better close up pictures of each part to anyone interested. Please only send a PM if interested. In this grab bag of parts you will find: (1)...

came off a Dana 60, both original axles, brake drums, backing plates.... Some hardware. For the sake of a price, $175 takes all plus shipping. MAKE OFFER if you need these...... Will seperate. Need to clean up the garage! Pics avail.

I have a hard to find original Jack assembly from a 68/69 Charger! I am located in Niagara Falls NY. It's original and needs restored/paint, $400 plus shipping. Please send a PM rather then reply below. I may miss your post but PM's (conversations) I'll surely get. Thanks! Pics to come

I have a 1970 Holley list number 4217 Carb that goes on a 383/335HP CA, Air, 4/speed , N95, With ECS. Sent out for a full restoration & correct Plating to factory colors/specs. This carb is specific only to the 1970 383/335HP (orange block) engine. It's a 4160 series fitting cars equipped with...

Holley carb, hard to find if you need it ( this is a core that needs rebuilt) specific to the 1970 383/335HP (orange block) engine. List 4218. It's a 4160 series fitting cars equipped with an automatic transmission, air conditioning, and is a California car with ECS. The mopar part number is...

For sale is this black wrinkled air cleaner as mentioned in the title, $360 plus shipping. May also consider a trade for a 70 383 air grabber air cleaner setup. Plenty of pictures available to anyone seriously interested.