Search results for query: *

I bought a U code Charger that the previous owner had saved this setup to put on. He had run it on his other car, but included it when I bought the R/T. I have never run it, it has been sitting for close to 5 years. It is exactly as it was when I unwrapped it. It is dusty and probably guessing...

I bought a U code Charger that the previous owner had saved this setup to put on. He had run it on his other car, but included it when I bought the R/T. I have never run it, it has been sitting for at least 4 years. It is exactly as it was when I unwrapped it. It is dusty and probably...

I just pulled this out of a car to swap to an earlier transmission. I have driven it sparingly for the last three years. It goes into first kind of hard if the car is moving and third has a whine. It should be gone through before installing but is functional. No catastrophic damage. No leaks but...

This is a center section from a donor car that I purchased. 489 case, 3.23 Sure Grip. The gears are date coded 8-21-70 and were removed from a '71 so I believe these to be the original gears and Sure Grip. The car was a roller and I never drove it before sourcing the parts I needed. Pinion...

I am swapping the 383 in my Charger for a 440. I have owned the car for three years and the engine has not caused any issues, seems to run well and does not use oil. Oil pressure is good, around 50psi at idle. I bought the car with this engine and was told it has the RPM cam to match the...

I have a 3.23 center section for sale after swapping to 3.91's. 742 case, Sure Grip, large yoke with U-Bolt Straps. I drove the car with this gear set for about a year with no issues. I only removed it to go deeper. The car that this was removed from had a lot of parts that were rebuilt when...

This is a center section from a donor car that I purchased. 489 case, 3.23 Sure Grip. The gears are date coded 8-21-70 and were removed from a '71 so I believe these to be the original gears and Sure Grip. The car was a roller and I never drove it before sourcing the parts I needed. Pinion...

I believe I had this listed for sale once before but I cannot find the thread. This intake came with a 71 V-Code car I bought. The previous owner had painted it orange to match the 71's. It is aluminum. I was told that it came off his dad's Super Bee. At the time I was not really up on what...

I bought these to put a 383 in my 318 73 Charger, but it turned out that one of my parts cars had a big block K-frame, so I won't be needing these. New in the box, unopened. Part #A73B8, http://www.engine-swaps.com/Pages/ProductsYear/73UP.html $177 new (shipped), asking $150 shipped in the...

I have a 727 small block case that has been cleaned and is ready to be reassembled. This is necessary for a new hemi swap. I believe that the guts from the big block 727 will fit in this, but please correct me if I am wrong or do your own research. Case is immaculate. Asking $150 obo and...

I have an aluminum cased A-833 4 speed. The exterior looks good, no cracks etc in the case. I have pictured the gears and synchros. I am not a 4 speed expert but I did not see any chips, scoring or discolorations in any of the gears or otherwise. I have read that there is sometimes an issue...