Search results for query: *

A set of lca’s that I can’t use on my A body, as I found that they are for B/E body’s. The have new bushings, stiffening plates, pivot pins and short bump stops. They come with new Hotchkis sway bar tabs that will need to be welded on. Asking 135 shipped or local pick up from 93230. Alaska...

This is the Volvo 2 speed fan with the Volvo relay and 80amp fuse. This fan uses negative power to run so if you have efi that is capable of controlling e-fan(s) your set. Or it can be used with a BMW temp switch and your golden. This fan is just like the Taurus fan (same motor) but it unbolts...

Since my fiasco with cooling my big block dart ended with electric fans, power steering will not fit anymore. They tried to occupy the same space, so back to manual. The box has about 10 hours of time, mostly idle and a few trips around the block. I just rebuilt the pump which is a Saginaw...

This is a reman Saginaw pump with brackets and pulley for b/rb. Also included is the correct water pump and crank pulley. Pump has not been used and the pulleys have about 6 hours of run time. I converted to serpentine and used my old pump, just swapped the pulley over. This set up was used in...

This is a Denso alternator conversion kit for b/rb and is used, has about 6 hours on it. The alternator is a 120 amp and the brackets are from AREngineering. Since I converted to serpentine, I no longer need this. I did helicoil the alternator to use a 3/8 bolt and opened the bottom slide cause...

i have a low mount ac compressor with mounts for big blocks. I've had this for 2 years, just for mock up and decided to go with a serpentine set up. It never had freon in it or power to it. I'm asking 160 shipped or local pick up is fine, zip is 93230.

Original pitman arm. Stud is tight but missing the boot. Asking 15 plus the ride, shipped from 93230.

Here is an adjustable pinion snubber that is new, just mounted. This for the 8 3/4. Asking 65 shipped or local pick up is fine fron 93230.

I changed out these parts from my uncles 70' RR and he doesn't need them so they are up for grabs. He would like to do a package deal but if you need or want any of them we can work it out. For the complete package, he's asking 250 plus the ride from zip code 93230. Items by themselves...

I have a set of rear 64' backing plates with hardware and the e-brake cables. I would like to get 25 plus the ride, shipped from zip code 93230 or local pick up is fine. My camera is down at the moment, but will post pics as soon as I figure out what's going on.

I'm not exactly sure what this is supposed to go on, but it's not for my 69' Dart. So with that said, I'm asking 110 plus the ride from zip code 93230, pick up is also welcome.

I'm selling my 6.1 intake manifold, 85mm ported tb and the spacers with gaskets. Manifold has not been ported so if ya wanted that could be done. The tb was ported by SNL (member lxmodguy) and I made some spacers out of high temp delron to keep the heat from the heads going into the manifold...

Long story short, I had these sitting on the shelf in my cabinet of parts, forgot about them, upgraded to the 11.75's, sold the 10.87's that I took off my car, and in the process of cleaning out the cabinet I found these...who knew!! So I have no use for them, so here they are. These are new...

I have the 10.87 drilled rotors, caliper adapters, pads, brgs. and seals for sale. The have about 1300 miles on them, and are ready to use on the 73 up disc spindle. I stripped 1 lug as I was trying to get the wheel off so that will need to be replaced. The rotors are not warped, although...

I have the lx car intake, fuel rails (never used) 5.7 injectors, power programmer (not married), stainless braided fuel line (never used). Asking 550 plus the ride, my zip is 93230, California. Send me a pm if interested.

I have my original pitman arm off my 64 Polara that is in great condition. The splines are perfect and the "swivel" is super tight. The boot is junk, but it will go with the arm if someone wants it. I can put on a boot, although it will not be correct, but will work just fine. It has...