Search results for query: *

Looking for a new or lightly used 7186 Edelbrock Peformer RPM intake with no modifications. PM me here if you have something within 300 miles of Savannah,Tenn...THANKS!

It's looks like I'll be going back to work, SOOOO...I'm looking for a .0001" test indicator, Federal/Starrett/Mitutoyo/Brown-Sharpe/Interapid, no imports, nothing needing repair, must pass calibration/certification. 12-24" vernier ht gage, no damage/no rust/no imports, same American-made...

Looking for old Cam Dynamics 7000+ 383-440 'cheater' cams produced in the 80s-90s. I'm looking for one undamaged to use as a regrindable core. If you have something, pm me here thanks...wb

I'm in need of a Chrysler throttle shaft lever for a Carter AFB/AVS carburetor (possibly TQ carbs as well). I have an aftermarket AFB that had been butchered/damaged and the lever was removed, so I need one from a Chrysler/Dodge/Plymouth AFB/AVS to replace it. Please Note: this part can be...

Looking for a high-quality 130T x 6 bolt, neutral balance, after-market Chrysler flywheel, steel or aluminum; please, no junk! New is best, used is acceptable if low-use with NO damage or modifications, and no 40+ year old units. Thanks...

Looking for SATIN finish Cragar super tricks with 4-1/2"-5" rear spacing. Must be in very good to excellent condition, no rash/corrosion/pitting/etc, 4-1/2" and 4-3/4"...OR...4-3/4" and 5" bolt patterns. PM me here if you have something I might be interested in, thanks.

Looking for a pair of Chrysler big block heads, casting number 4532287, un-molested, no mods or porting, prefered castings only, no vlaves or other parts. If you have something as-described, pM me here, thanks...

Looking for a decent set of 1.5 Isky rocker arms (with or without GOOD shafts) for big block (361-440) Chrysler engines, no damage or modifications (other than RAS bushings); rockers only or with GOOD adjusters. PM me here if you have something as-described, thanks...wb

Looking for a decent electric tach for my run-in stand. No junk please, nothing expensive (I can go to Summit/Jegs for that). If you have something decent and reasonably priced, please PM me here, thanks...wb

Looking for a reasonably-priced 10" 66-later 727 torque converter. Nothing damaged or needing work please, must be in 'bolt-in and run' condition; something in the 2500-3000 rpm flash range. PM me here if you have something as-described, thanks!

Still lookiing for a pair of 15x10 Cragar Super Trick wheels with both 4.5 and 4.75 bolt patterns with a 4-1/2" or 5" rear spacing in natural satin finish and in very good to excellent condition. If you have something as described, please pm me here. Thanks for viewing...wb

Looking for a very nice pair of 625 cfm Carter AFB carburetors. MUST be clean and very nice condition and without damage/modifcations. If you have something as described, please pm me here, thanks...wb

I did another of those 'wait and see' numbers...yeah, it backfired on me...again! Sooo, I'm trying to find a Quicktime 6073/8 or Lakewood bellhousing for B/RB/426H, new or used w/o any damage. If you have something as described, please PM me here, thanks...wb

I'm looking for an 8 bolt neutral balance aftermarket 130T flywheel, to buy or borrow for some dyno testing. I had a NOS Hays that I figured I'd never use...ha, how many times have y'all thought that and had it backfire?! Well, if you have something, PM the old dummy here, thanks...wb

Looking for a set of 4.56 gears for 5 series Dana 60 w/29 spline. Must be in excellent & undamaged condition. If you have something that fits the description, please PM me here, and thanks for viewing...wb

Looking for a nice pair of Carter 9625/9626 or 9635/9636 Carter AFB carburetors. No corrosion or nasty carbs, must be decent with no damage or broken parts. If the plating on the linkage pieces is good, that's a big plus but rusty linkage is unacceptable, they must be void of all rust/corrosion...

Still loookiing for a set of 15x10 Cragar Super trick wheels with both 4.5 and 4.75 bolt patterns and a 4-1/2" or 5" rear spacing in natural satin finish. They need to be satin finish only and in very good condition. If you have something, please pm me here and thanks for viewing...wb

No longer needed, thanks...

delete

Looking for a verey good condition SW 9000 rpm mechanical tachometer as the one shown. MUST be in excellent to new condition, no damage/rust/wear/etc. If you have something as-described, please PM me here, thanks...wb