• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Every other daily driver

Overview Gallery
67 dodge coronet 440

About this Mopar:

B92C114D-5114-4F7E-A5DA-EA37FA288046.png
187289A3-BB1D-4684-B8AF-30AABF7266CC.png
EE5BBADB-0742-44A8-AB8F-72A2D9C9B996.png
0E69189C-388F-417C-BD37-E1202C7E1CB6.png
BEC1BE9E-003F-443A-B671-A6CB9EDC2912.png
302662CD-AB24-459A-BE75-A1896CFCADFA.png
576EB8B8-A0D0-4447-B286-1A32E9850C29.png
3E5748DB-F9C1-407D-8286-A898500D19EE.png
99D81CB3-E9AE-4F56-BA33-6EB488CDF2B0.png
E14003A2-C8C4-4ED3-B2BC-53626F1B84DF.jpeg
my coronet is not factory stock, or highly modified. But a great mix of stock looks, with a lot of go like hell. Mirror paint, perfect interior, clean trunk, no rust. Engine compartment has just the right amount of new and old to make it so reliable, not afraid to drive it 100s of miles with no problem. I’m so glad that I finally switched to the dodge side of the universe. See you all on the west coast some where.

Comments

SDCoronet
George, your are an inspiration for me to hurry and finish my car, which will end up looking nearly identical to yours except for the rims and blue paint. If you have them, could you post pics of how you did your taillight mods, including a pic of them with the brake lights on?
 
Ratbastard
SDCoronet said:
George, your are an inspiration for me to hurry and finish my car, which will end up looking nearly identical to yours except for the rims and blue paint. If you have them, could you post pics of how you did your taillight mods, including a pic of them with the brake lights on?
Click to expand...
I’ll do what I can when it gets dark outside, so you can see how bright they are. The led light fixtures are diesel trailer stop, turn, and brake that are oblong, 8x2in red lights. I put a piece of dence foam in the light bucket, with contact cement to hold them in place. The lights run on full 12 volt, so just hard wire.like a regular bulb.your tail lights will be ten times brighter, everything was about 45 dollars for lights and foam, and about 2 hours. Any truck stop or store will have them.
 
Ratbastard
SDCoronet said:
George, your are an inspiration for me to hurry and finish my car, which will end up looking nearly identical to yours except for the rims and blue paint. If you have them, could you post pics of how you did your taillight mods, including a pic of them with the brake lights on?
Click to expand...
Here is the best picture I could get at nite, sorry the lights are so brite
 
dantheman
A real beauty. IMHO, the stance is perfect. Gives me inspiration to get my 67 finished. 440, 4 speed, convertible. Been off the road since I don't want to mention....Dan
 
Ratbastard
To all that have left very kind comments, I thank you so much! As you all have beautiful cars, we are very fortunate to drive year round in California. The car shows very well, and we have a great time hearing all the story’s everyone has to tell when they were back in the 60s. To all that had one, and now own one again, I hope to run in to you at a show, some where and shoot the bull, tell story’s, and blister some rubber. Thank you all for a great site. FBBO forever!!!!!!!!!
 
Ratbastard
Ya, I saw a graveyard car episode that had a 66 charger with what they called a nascar edition model that had a duel plenum intake that went through the upper firewall area that fed off the vent slits at the windshield base. A high pressure area when driving. It gave me the idea, but had to make everything to fit. Came out ok.
 
You must log in or register to reply here.
B92C114D-5114-4F7E-A5DA-EA37FA288046.png

Item information

Category
FBBO Member Photo Garage
Added by
Ratbastard
Views
1,865
Comments
17
Last update
Rating
5.00 star(s) 6 ratings

More in FBBO Member Photo Garage

More from Ratbastard

Share this item

Back
Top