• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

68 Road Runner restoration

The newest toy to the collection

About this Mopar:

1968 Plymouth Road Runner Sunfire yellow, black vinyl top , silver and black interior. Was originally an automatic car but someone converted it to a 4 speed. I have replaced the trunk pan and have repaired the inner and outer wheelhouses. I am currently working on the quarter skin installations. Hope y’all enjoy the pictures. 19948152-B6CF-4486-9A18-A83DDE836C0B.jpegA09AA28B-4CBD-4FEE-89B0-B4980809DCFD.jpeg60815C19-20C2-4F46-B35D-34694D1780DF.jpeg1D90064F-B047-4D2C-983D-B8FA673F27E6.jpeg59148EB4-2955-4111-B67E-49052D79D131.jpeg2E26CBEE-A379-47DE-BFBC-83A279514040.jpeg88214E6A-60BD-40AF-8ECC-518426B0B9B2.jpegEEEA4122-BDE5-430D-83A8-EE1C3D3FCACC.jpeg021D18FA-F8C2-4D5D-949B-958BB5A51E83.jpeg82670F3A-C923-4887-8D3E-9BB49B6FB8E0.jpeg78A8DA77-8CBF-4E8B-9230-AC0BF33AF31D.jpeg14B42B6D-EC7E-4F80-B170-03CEB18E6964.jpegThanks. Here are some more pictures of the progress. Here’s my motivational poster thought some might like it
83E15539-5D7B-44B7-BBD1-27C770A4C9BB.jpeg
. Half way done with the restoration only 2 more Road Runners to install. Hers an update. Drivers side quarter skin installed. this is the last big piece to be installed. Thanks for looking 24E48059-8D1C-4047-B60E-4DC66586C03C.jpegCF1C2637-39EE-4579-ACC8-99515457B72F.jpegCF1C2637-39EE-4579-ACC8-99515457B72F.jpegB8364A75-72A2-48CD-AB09-3501F27F91DC.jpeg9E913FCC-93E7-4B53-867C-9CA9ADF3B720.jpegFDB1D925-5B1A-40E5-B5DA-0883059D1CB6.jpeg here’s a little progress had to fix the rear speaker cutout and started to fix the hatchet job on the inner fender well where the clutch s bar attaches. Closing it up going to put in a hydraulic clutch..Ok here’s a little bit of progress on the bird. Got a little paint shot. Re applied seam sealer to the floor pans. Cleaned and osphoed the floors cleaned the old insulation off the inside roof.. starting to work on welding up a lot of extra holes in firewall and engine compartment. Enjoy and thanks for looking. Here’s some pictures from today. Was able to spray the lizard skin sound deadner in the inside and sprayed a little yellow on the package tray

Latest updates

Here’s some update pictures of the bird!!!. Rear axle housing and suspension installed, Rear glass installed. Headliner is in what a PITA!!!! Rear seat and seatbelts in back seat side panels in armrests installed !!!! Thanks for looking

Attachments

  • IMG_3447.jpeg
    IMG_3447.jpeg
    78.6 KB · Views: 18
  • IMG_3441.jpeg
    IMG_3441.jpeg
    60.4 KB · Views: 14
  • IMG_3439.jpeg
    IMG_3439.jpeg
    71.3 KB · Views: 18
  • IMG_3440.jpeg
    IMG_3440.jpeg
    58.7 KB · Views: 16
  • IMG_3438.jpeg
    IMG_3438.jpeg
    91.3 KB · Views: 15
  • IMG_3440.jpeg
    IMG_3440.jpeg
    58.7 KB · Views: 18
  • IMG_3447.jpeg
    IMG_3447.jpeg
    78.6 KB · Views: 16
  • IMG_3421.jpeg
    IMG_3421.jpeg
    72.6 KB · Views: 16
  • IMG_3422.jpeg
    IMG_3422.jpeg
    53.6 KB · Views: 18
  • IMG_3418.jpeg
    IMG_3418.jpeg
    47.8 KB · Views: 15
  • IMG_3416.jpeg
    IMG_3416.jpeg
    69.1 KB · Views: 15
  • IMG_3427.jpeg
    IMG_3427.jpeg
    63 KB · Views: 16
  • IMG_3419.jpeg
    IMG_3419.jpeg
    45 KB · Views: 12
  • IMG_3415.jpeg
    IMG_3415.jpeg
    68.3 KB · Views: 15
  • IMG_3438.jpeg
    IMG_3438.jpeg
    91.3 KB · Views: 15
I’ve been very fortunate to get quite some time to work on the bird lately. Fuel system from back to front installed, electric fuel pump and sending unit wiring ran to fire wall, all the glass is in the doors and operational ,front door panels installed and I’ve started on the valve train for the engine and a little painting on some engine parts. As usual waiting on more parts. If anyone has a b body with the deluxe interior I sure would like to see some pictures of it all together. Ive been waiting 3 months for my headliner to be made. It’s holding up progress in the interior Thanks for looking!!!

Attachments

  • IMG_3091.jpeg
    IMG_3091.jpeg
    64.1 KB · Views: 30
  • IMG_3156.jpeg
    IMG_3156.jpeg
    43.4 KB · Views: 31
  • IMG_3155.jpeg
    IMG_3155.jpeg
    38.7 KB · Views: 33
  • IMG_3134.jpeg
    IMG_3134.jpeg
    40.5 KB · Views: 35
  • IMG_3092.jpeg
    IMG_3092.jpeg
    51.6 KB · Views: 32
  • IMG_3158.jpeg
    IMG_3158.jpeg
    44.4 KB · Views: 30
  • IMG_3157.jpeg
    IMG_3157.jpeg
    41.3 KB · Views: 34
  • IMG_3234.jpeg
    IMG_3234.jpeg
    108.9 KB · Views: 35
  • IMG_3233.jpeg
    IMG_3233.jpeg
    125.7 KB · Views: 33
  • IMG_3232.jpeg
    IMG_3232.jpeg
    82.5 KB · Views: 31
  • IMG_3230.jpeg
    IMG_3230.jpeg
    64.2 KB · Views: 31
  • IMG_3239.jpeg
    IMG_3239.jpeg
    98.2 KB · Views: 30
  • IMG_3240.jpeg
    IMG_3240.jpeg
    82 KB · Views: 28
  • IMG_3241.jpeg
    IMG_3241.jpeg
    85.6 KB · Views: 29
Well things have been progressing. Got all the glass in the doors, fuel system is plumed from the back to the front. Working on door panels and a lot of miscellaneous items! I must say that it’s a chore to remember where one put all the items that I took off 5 years ago and where they go!! Thanks for following my journey

Attachments

  • IMG_3134.jpeg
    IMG_3134.jpeg
    40.5 KB · Views: 31
  • IMG_3092.jpeg
    IMG_3092.jpeg
    51.6 KB · Views: 31
  • IMG_3091.jpeg
    IMG_3091.jpeg
    64.1 KB · Views: 30
  • IMG_3155.jpeg
    IMG_3155.jpeg
    38.7 KB · Views: 30
  • IMG_3158.jpeg
    IMG_3158.jpeg
    44.4 KB · Views: 28
  • IMG_3157.jpeg
    IMG_3157.jpeg
    41.3 KB · Views: 28
  • IMG_3189.jpeg
    IMG_3189.jpeg
    81.7 KB · Views: 32
Speedbird
Speedbird
I wish I had the money I've spent on things I forgot I already had.
Both things that I bought twice over the years and old spare stuff I forgot I had.
New K bolts when I've probably got close to 12 in my junk yard hoard.
One example.
And the things I screwd up in installing and bought twice. Front glass seal. 0d2HbvW52V8
And the things that I bought that were wrong.
Still can't figure out why I must have trashed the seat belts.
They were bad anyway.
Oh well
Eric Pearson
wedgee
wedgee
Haha...I was thinking I had wrote this...

Comments

Most people don't really know what it takes to restore these car's. I never have added up what I spent on restoring my bird. Really don't care just get in it and drive it. Wish you the best of luck with the build. What motor are you running. Put the four speed back in my car that is what it came with. Love shifting gears. Thanks for the pic's and the insight on the build. :thumbsup:
 
Most people don't really know what it takes to restore these car's. I never have added up what I spent on restoring my bird. Really don't care just get in it and drive it. Wish you the best of luck with the build. What motor are you running. Put the four speed back in my car that is what it came with. Love shifting gears. Thanks for the pic's and the insight on the build. :thumbsup:
I plan on a 496 striker with the FiTech 6 pack fuel injection. 3:23 sure grip,vintage air,power steering and 4 wheel disc brakes. I hope that when it’s done myself and my best friend of 50 years will take it on the power tour
 
Your workmanship is very impressive. Look forward to seeing this one through to the finish. Best wishes!
 
Its coming along. going to spray lizard skin sound control inside the car tomorrow. I will post some pictures soon. also have been welding up numerous. holes in the firewall. thanks for checking up on the project.
 
The quarter skins I got from Year One come up over the top.
Got the last two they had "scratch and dent" deal.
First skins I've ever done. Was surprised that they come up over the top of the panel.
That's were I'm making the seam, on top.
Is that something people do?
Haven't seen any before.
They also go around the door jam and down to the pinch weld on the rocker.
But the tail light end will have to be cut and modified.
 
The quarter skins I got from Year One come up over the top.
Got the last two they had "scratch and dent" deal.
First skins I've ever done. Was surprised that they come up over the top of the panel.
That's were I'm making the seam, on top.
Is that something people do?
Haven't seen any before.
They also go around the door jam and down to the pinch weld on the rocker.
But the tail light end will have to be cut and modified.
My brother did the fitting on my car he left the piece that wraps aroung the front at the door and cut below the seam on the roof.
he's done many cars and lots of mopar resrorations
Yes, and we had to modify the back sections as well.
Nothing fits very well without some work to make it right.
 
I cut my quarters about an inch below the top panel line then butt welded it. It seems to work well. A lot of welding and grindin. But well worth it
 
That’s going to be killer. I love that 2 tone. interior and of course Y2 yellow. But I’m biased on that… keep up the great work!
 

Item information

Category
FBBO Member Photo Garage
Added by
Eric Pearson
Views
9,144
Watchers
13
Comments
24
Updates
13
Last update
Rating
5.00 star(s) 5 ratings

More in FBBO Member Photo Garage

Share this item

Back
Top