1963 Savoy Super Stock Springs

[JEDS67]

Hello I was just wondering if anybody new the part numbers for super stock springs to fit my Savoy.The chassis is all stock except for a mild 440 and a 4 spd.Thank you for your time.

 

[malex]

The part numbers on the ss springs that came off my 64 Plymouth are
3690456
3690457
I cannot remember which is right and left but that is easy to research with the part number. These springs are rated for a 3400 lb car and they have a 20" distance between the centre of the front eyelet bushing and the pin on the leaf spring. You will need to change the front spring hanger for these springs.

 

[JEDS67]

I kind of thought those were the correct numbers but I just wanted to make sure.Thanks malex.Here is a pic of my conversion.

 

[Dodge 330]

The part numbers on the ss springs that came off my 64 Plymouth are
3690456
3690457
I cannot remember which is right and left but that is easy to research with the part number. These springs are rated for a 3400 lb car and they have a 20" distance between the centre of the front eyelet bushing and the pin on the leaf spring. You will need to change the front spring hanger for these springs.

'63 uses the shorter 20" front segment. He will not have to change the front spring hanger.

I use the 456/457 SS springs in my '63.

 

[malex]

I kind of thought those were the correct numbers but I just wanted to make sure.Thanks malex.Here is a pic of my conversion.

That is a lot of work! Good job! I commend you for taking on the challenge!!

 

[miller]

'63 uses the shorter 20" front segment. He will not have to change the front spring hanger.

I use the 456/457 SS springs in my '63.

Probably the same numbers on my '64. Slipped right in. My biggest issue was finding a set of stock rear shackles, after I tossed the 12 inchers, some clown put on.

You've got that automobile looking great!!! Wish I had one of those roll-overs.