• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

1965 Coronet stroker 4 speed

Status
Not open for further replies.

wedgie

Well-Known Member
Local time
11:17 PM
Joined
Aug 4, 2008
Messages
630
Reaction score
180
Location
America
Feedback: 0 / 0 / 0
Contact seller
I hate to do it, but have no choice. The Coronet and all the parts, spares, bits, and pieces is now for sale. This thing has been a lot of fun building and driving. Just finished installing the new MP452 heads (straight plug Eddys). Currently set up with a 750 Holley and exhaust manifolds. Painted everything, including the aluminum heads, waterpump and housing, intake, etc for a more subtle look. The six pack is an original setup from my 1970 Cuda. Includes everything to convert back to 727 including a clone A990 trans, original shifter, cables, console top. Also included is the power steering setup (new box and pump), Multiple sets of trim and moldings (nice), A990 grille and headlight doors, spare hood with scoop (correct matching Viper silver paint), stock radio and heater, spare set of prostars w/Mickey Thompson tires, original 273 engine (freshened), stock drum brakes (new), 4.10 suregrip (freshened), original steering wheel, and so many other parts that I just can't remember them all. This car has won many shows, the most important to me was the cars for kids show where it took best of show, best prostreet, and peoples choice.
http://nashville.craigslist.org/cto/3411807934.html
 
nice looking car ,good luck with selling her :eusa_drool:
 
The second picture of the car as it now sits with stock hood, custom made steelies, stock dogdishes, manifolds, stock grille. The top pic shows with the A990 grille, hood, and prostars. All these bits and pieces are included along with all the stock 500 trim, stock spinner wheel covers, complete six pack setup, A990 clone trans and 3800 convertor, all parts to install the trans including the stock shifter and console top, 4.10 suregrip, complete radio and heater setup, newly recored stock radiator with automatic trans cooler, Koffel prepped 906 heads, and a truckload of other parts, bits, and pieces. Just installed MP452 aluminum heads for a truly streetable 89 octane friendly compression ratio. I have mega dollars in this thing and it shows well.
 

Attachments

  • Steel wheels and caps 011.jpg
    Steel wheels and caps 011.jpg
    71.9 KB · Views: 640
  • 2010 look.jpg
    78.6 KB · Views: 573
Status
Not open for further replies.
Auto Transport Service
Back
Top