1966 Quarter Panels

[Belvedereblack66]

I have a 66 belvedere II and in need both rear quarter panels. I ordered a set from classic to current fabrication and I have had them send me multiple sets because they were either bent or just built wrong. the quality of the bending look very inaccurate. has anyone used a different company or experiences with these hard to find panels?

 

[gtxno1]

I purchased a pair of them and never used them they are way too thin like a beer can I pieced mine together the wheel lip area from auto body specialties and the section from the rear tire to the bumper from AMD the abs ones are just ok and the AMD is great but at least you are working with metal the same thickness unfortunately no one makes them

 

[Fran Blacker]

Know nothing about these, not mine.

http://www.ebay.com/itm/PLYMOUTH-BE...ash=item3aeb001d31:g:~20AAMXQDrJR3Lru&vxp=mtr

http://www.ebay.com/itm/PLYMOUTH-BE...ash=item3d41965463:g:-GEAAOxyV85R3Lsh&vxp=mtr

 

[2quick]

This has been gone over hundreds of times but best bet if you want your quarters to have somewhat a factory shape is to cut wheel lip from 4 door donor and use AMD Rear lower section together.

 

[Dako]

Call AMD and verbally request them. You won't get any, but they will at least record another demand for 66/67 quarters.

I ordered Sherman panels. They are also thick like factory metal...and as gtxno1 stated, pieced them together.

 

[Belvedereblack66]

Yea I guess the best bet is to use the two separate pieces instead of looking for the whole panel

 

[Mattias]

I have the same problem with my -66 Coronet.
Seems like a lot of suppliers are selling the same panels? Who is the best reproduction manufacturer? I need both sides wheel arch and the lower rear part of the quarter.