• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

SOLD 1967 Barracuda Notch

Status
Not open for further replies.

wannadrag

Well-Known Member
Local time
7:27 AM
Joined
Nov 6, 2009
Messages
3,602
Reaction score
1,079
Location
Waupaca WI
Feedback: 5 / 0 / 0
Contact seller
67 Notch, engine is a 68 318,stock bottom end with a 474 purple shaft with springs to match, aluminum intake and 600 eddy carb with Hooker competition headers and summit full exhaust. 727 trans with a 2500 stall convertor,8.75 rear with a 489 391 geared sure grip with all new seals and green axle bearings. It runs and performs well. Trans has the typical leak from the sector shaft. Tires are new. The body is a no rust TX original /6 car but does have a fair amount of dings here and there. There is no rust in the spare tire well in fact it still has paint, rails and bottom side look pretty close to when it was new. No bubbling under the vinyl top It is about 80 percent original paint yet so nothing to hide and 66340SEDAN from FABO can vouch for the condition as it came from his dad. Runs and drives nice but I am ready for a change.$9000 cash or mopar trades and I am in central WI near Waupaca

Trades 62-65 B body and I like the post type cars ,68-70 B body ,67-69 or 70 dart, 70-72 duster or demon and I prefer complete drivers but would consider a roller if all it needed was a drivetrain

If you have questions please PM me as I don't check these threads that often




cuda3 002.JPG
cuda3 001.JPG
cuda3 003.JPG
 
Status
Not open for further replies.
Auto Transport Service
Back
Top