1967 Dodge Charger Power Window Problems

[Charger Too]

Rear passenger side window motor is fine but window binds and goes crooked going up and down. Is a manual window mechanism the same as a power mechanism? Secondly, would parts off of a power window mechanism from a 1968 Chrysler 300 (passenger rear) be the same as a 1967 Charger? Thanks!

 

[Jerry Hall]

It could be something as simple as a broken roller. Take the trim panel off and see what is binding. Many of the parts in there are the same as manual windows.

 

[Dave6T4]

Usually these mechanisms are specific to the car, because of room available and attachment points. I converted my 1967 R/T from manual to power windows, and these were different mechanisms. As someone has already said, it could be a broken roller, or possibly a retaining clip has broken allowing part of the mechanism to fall apart. Unfortunately, it is a brute to get to, requiring rear seat bottom and side panel to come off. Sounds like a winter project.

 

[RemCharger]

There's a sticky at the top of this section just for this.