rm21h8a
Active Member
I have put new quarter panels, full amd floor pan, amd trunk pan, amd filler panel, outer wheel houses, inner fender and radiator support on this car. The frame rails and torsion bar cross member are near perfect on it no rot at all. The car was originally undercoated but i have stripped all but a small section of it so far. It was originally sunfire yellow with a black vinyl top 383 4 speed, black interior, and air grabber with hood stripes. Unfortunately someone years ago removed the inner fenders i suppose to make a drag car out of it and lost the fender tag. The floor pan and trunk floor have been welded down to be secured but still need to be spot welded to the frame rails. I have both very nice front fenders and a nice roadrunner hood that go with the car. I have the 4spd trans, bellhousing, and all hardware for the setup. It has a built dana 60 with 4.10 gears but i have not made the mounts for the pinion snubber yet. It will come with 65 383 hp block crank and heads, but i do have a 440 short block with forged pistons resized rods with arp bolts and steel crank for an extra $1000. I have a very nice bench seat that will need recovering but the padding and frame are near perfect. It has a decent set of tail lights, all of the trim except the bottom pieces of chrome for the rear window. I have all of the glass for the car as well. The body still needs some work but is almost ready to be primered and start blocking. I have alot of parts for this car but havent started buying the new things yet just been focused on getting the body done. It does have a clear maryland title as well. If you have any questions just give me a call. I am not forced to sell just looking to fund another project I have. Thanks for looking.
