mopar mafia
Well-Known Member
I have a standard bore 1970 440 block in good condition but has one corner ear broke off as shown in pic. I was going to just use an oversize washer and forget about it or you can have an ear welded. it comes with a standard steel crank that will need to be turned because it has been sitting for several years in garage. comes with brand new clevite rod and main bearings. .040 over forged trw pistons that was used in a 440 race motor that only had about 25 passes on it when it spun a bearing and was pulled apart. I never even cleaned the pistons to show they have very little run time.set of 440 ly rods that were reconditioned with new rod bolts but they have been sitting in my garage for a couple years also and have surface rust and a set of 906 heads that will need rebuilt. it is located in leitchfield, ky. 42754. I can store this until you can pick up or arrange shipping. 600.00 for all of it.
