Canadian1968
Well-Known Member
After posting my 68/69 3d printed hood signals for 68/69 chargers. I had a alot of request for 1970 version .
I acquired a set of original lens. The bulb that the originals use is not a very common bulb and proved to be challenging to find for any sort of reasonable cost.
I designed my version to accept a more common BA9S bulb instead. Although slightly larger it still fits with the original dimensions of factory lens. It's is a bit long on back but this has no affect on functionality.
I used a simple ground wire instead of strap. And made a locking cap to hold the light in place. Other than splicing in the power wire these are plug and play just like my 68/69 version I made .
Feel free to message me with any questions or shipping quotes. Of course 68 / 69 are still available as well !
I acquired a set of original lens. The bulb that the originals use is not a very common bulb and proved to be challenging to find for any sort of reasonable cost.
I designed my version to accept a more common BA9S bulb instead. Although slightly larger it still fits with the original dimensions of factory lens. It's is a bit long on back but this has no affect on functionality.
I used a simple ground wire instead of strap. And made a locking cap to hold the light in place. Other than splicing in the power wire these are plug and play just like my 68/69 version I made .
Feel free to message me with any questions or shipping quotes. Of course 68 / 69 are still available as well !
