• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

1970 Roadrunner

Gregg DeGeorge

Well-Known Member
Local time
12:11 PM
Joined
Oct 17, 2017
Messages
242
Reaction score
45
Location
Naugatuck Ct 06770
Sail panels on a 70 roadrunner what holds them tight to the car ,mine are sagging in the middle I have new ones what to reinstall them to clean up interior
 
Are you referring to the cardboard panels on the interior side of the C pillars? Aren't they wedged in place between the rear window trim and headliner border trim?
 
If they are the same as 69's, there is a clip attached to the back of the panel that pushes into the car. Pretty common for the clip to come apart from the board.
 
If they are the same as 69's, there is a clip attached to the back of the panel that pushes into the car. Pretty common for the clip to come apart from the board.

and the clip is just pressed into the cardboard and held in place with little star shaped prong teeth. Not the most steadfast method. I believe I glued one of mine back in when it came loose.
 
and the clip is just pressed into the cardboard and held in place with little star shaped prong teeth. Not the most steadfast method. I believe I glued one of mine back in when it came loose.
Yes, I have used contact cement myself on them.
 
Auto Transport Service
Back
Top