- Local time
- 8:06 AM
- Joined
- Oct 16, 2014
- Messages
- 29,607
- Reaction score
- 73,189
- Location
- Salisbury, Vermont
This is a 100% disassembled trans. Has a short truck tail stock, 4 disk clutches three pinion planetarys, 10 springs I think and a valve body with a shift kit. 2.9 or 3.2 ratio lever. I drove the 86 ram around and it operated flawlessly. It was behind a hot 73 440. I dissassembled it thinking to inspect and reassemble with new disks etc but found a 400 six pack tranny with 4 pinion planetary's and forged hardened shaft etc and used it instead. So, rather than throw this one back together and sell it only to have the new owner rip it apart again.....lol. It's all there and did operate fine. I launched that 86 Ram truck from jump to 100 MPH and it rowed through the gears like clockwork and with gusto.
