BIG-A
Well-Known Member
I bought all of these parts off Mike Gaines back in 2015 and my ideas of a new 440 never came to life. 213 casting heads with big valves and port job. Crane springs, locks and retainers with locking valve seals. Heads came off running car but have been sitting, I cleaned one combustion chamber and the valve head as pictured.The head of the valves measure 2.14 on the intake and 1.81 exhaust, flow numbers on the print out were before bigger valves were installed. These more than likely could use a valve job before install but are in good used condition. $400 plus exact shipping.
Crane gold rocker arm kit for Mopar big block. Complete as pictured, one was clearanced to clear the valve cover and a few others have some small dings that do not affect function. $175 plus exact shipping
Mopar M1 Single plane for 440,polished look. Needs to be cleaned up a little. part number p4532174. $160 plus exact shipping.
Buy all 3 and I will cover half the shipping.
Here is the link to Mike's original add.
https://www.forbbodiesonly.com/mopa...mopar-stuff-take-a-look.88894/#post-910227575
Crane gold rocker arm kit for Mopar big block. Complete as pictured, one was clearanced to clear the valve cover and a few others have some small dings that do not affect function. $175 plus exact shipping
Mopar M1 Single plane for 440,polished look. Needs to be cleaned up a little. part number p4532174. $160 plus exact shipping.
Buy all 3 and I will cover half the shipping.
Here is the link to Mike's original add.
https://www.forbbodiesonly.com/mopa...mopar-stuff-take-a-look.88894/#post-910227575
