SOLD .30 over 440 pistons

[twayne24365]

I have a nice set of l2266 forged TRW pistons for a .30 over 440. they are on a good set of ly rods with rings installed. the pistons were notched by my local machine shop for valve clearance. these were installed in a motor but it was NEVER ran, i switched to l2295's for more compression. looking for $300. will ship at buyers expense. Thanks, Tyler

 

[65BlueBelvedereII]

Hi. Can you tell me what Heads (Open/Closed Chamber), Valve size (2.08/1.74, or 2.14/1.81)? What is the advertised Compression Ratio of these Pistons? Thanks in advance. Rick

 

[69RRGTX]

Where in MD are you??

 

[twayne24365]

Im in westminster, about 30 min from baltimore, and i was going to use 2.14 1.81 valves in 906 heads. Should be around 9:1 depending on how far they sit in the hole, here is some info from jegs
440ci Stock-Type Piston, .030'' Overbore
Piston Dia.: 4.350''
Piston Top: Flat Top
Pressed Pin
Comp Ratio: 9.33:1 w/78.5cc Heads, 8.66:1 w/88cc Heads

 

[wedge69]

I am in Hanover and grew up in westminster ! I want a set of low compression slugs for a blower project. Where you at as I can come look them over. Just PM me your info and we can hook up ?